Vehicle Fit-outs & Fabrication

UAGS (UAG Services Pty Ltd) designs and fits racking cages for traffic control utes and trucks from Bayswater North, Victoria. Every cage is designed in-house in CAD, and we fit the cage and the rest of the vehicle in-house. Standard designs start from $2,170 + GST, and custom cages and fit-outs are quoted per vehicle.

UAGS started in 2009 alongside Matt Calvi's own traffic management business, so our cage layouts come from people who have loaded, driven and unloaded traffic control vehicles, not just drawn them.

Designed in-house in CAD. We have been building racking cages for more than 15 years and have more than 50 designs. Each layout is drawn in CAD around the equipment it carries: multi-message frames, corflute panels, Y-frame legs, bollards, stop/slow bats and the arrow board. Each standard design has its own design number.

Sized for the gear we sell. We also supply the frames, panels, legs, bollards and arrow boards that go in our cages, so each section is sized for that equipment. Order the cage and the loadout together and you know it all fits.

Fully welded steel. Our cages are fully welded from 25 x 25 x 1.6mm SHS DuraGal steel, with cold galvanising applied to the welds, and carry a 2-year limited warranty on the welded fabrication from UAG Services Pty Ltd.

Standard or custom. Pick one of the standard designs below, have us modify one, or ask us to draw a cage around your vehicle and equipment list.

All three standard designs share the same front section: 25 multi-message frames, corflute panel sections, 60 Y-frame legs, two stop/slow bats, four Temporary Hazard Markers, more than 10 cone bars and a B-Class arrow board on two 1600mm mounting bars. The difference is bollard storage and length.

Design 7, 1600mm long. No bollard storage. Our most popular cage.

Design 21, 1980mm long. Adds a hanger for up to 10 T-top bollards and compartments for 9 bollard bases.

Design 16, 2025mm long. Adds a section for 30 T-top bollard stems and an enclosed storage box, with the bases carried in the tray space.

All three are 1215mm high and 1650mm wide overall, with a 1550mm footprint. Measure your tray before choosing, and cones sit in the tray space beside the cage on every design.

A cage is usually one part of the job. We supply and fit the whole vehicle in-house at our Bayswater North depot in Victoria: racking cage, B-Class arrow board, beacons and light bars, work lights, dual battery system, wiring and UHF radio, plus the signs, frames, bollards and cones to load it.

How a fit-out works. You tell us the vehicle, the tray size and what the crew needs to carry. We recommend a standard design or draw a custom cage in CAD, then work through the products with you: which arrow board, which beacons and lights, the battery and electrical setup, and the radio. We quote the whole vehicle, build the cage, and fit everything in-house so the vehicle leaves ready to load.

If your own installer is fitting the cage, we can ship it Australia-wide.

See finished vehicles on our Our Work page.

Other fabricators have started copying our cage layouts and offering them as a UAGS cage. A cage that looks similar is not necessarily built to the same dimensions, steel or welding, and it does not come with a UAGS warranty or our support if the layout needs changing later.

Genuine UAGS cages are only supplied by UAGS. If you have been quoted a UAGS design by someone else, call us on 03 8750 0926 and we will tell you what you are actually getting.