Traffic Vehicle Racking Cage | Design 21 | Bollard and Base Storage

Traffic Vehicle Racking Cage (Design 21) is an Australian-made, vehicle-mounted storage and deployment system for traffic control equipment, with a bollard hanger and compartments for bollard bases. It mounts to the tray of a traffic control ute or truck and suits crews carrying a smaller set of T-top bollards with their bases, along with multi-message frames, corflute sign panels, frame legs, cones and stop/slow bats. It is used by traffic management companies, civil contractors, utility crews and councils running equipped traffic control vehicles.

Design 21 uses the same front layout as Design 7, our most popular cage. At the rear it adds a single-row hanger for up to 10 T-top bollard stems and three compartments that hold three bollard bases each, so the bollards and their bases travel together on the cage.

The cage is installed on a ute or truck tray as part of a traffic control vehicle fit-out. We fit traffic racking cages at our Bayswater North depot in Victoria. Contact us for a fitment quote. The cage can also be shipped Australia-wide if you are arranging installation yourself. Sign panels and multi-message frames slide into bent zinc-plated steel sheet sections, an extended leg section holds the frame legs, and a chain secures cones during transport.

During site setup and pack-down, crews work directly from the cage. Frames, panels, legs, bollards and bases sit in dedicated sections, so equipment comes off the vehicle and goes back on in a repeatable order rather than being loaded loose on the tray. A dedicated stop/slow bat compartment keeps hand signalling equipment separate from the sign stock.

The cage is fully welded from 25 x 25mm SHS DuraGal steel, with cold galvanising applied to the welds. The sign and frame housings are formed from bent zinc-plated steel sheet. UAGS has been building racking cages for more than 15 years, and this layout has been refined through that time in service on working traffic control vehicles.

Design 21 holds:

• 25 multi-message frames, such as the Multi Message Traffic Sign Frame 1
• Two 200mm sections for 600 x 600mm corflute sign panels and one 200mm section for 1200 x 300mm panels
• 60 Y-frame legs, such as the Heavy Duty Traffic Sign Y-Leg (Yellow)
• Up to 10 T-top bollard stems on a single-row hanger, such as the Contractor Series T-Top Bollard Stem (1140mm)
• 9 bollard bases in three 450 x 150mm compartments of three, suiting both Contractor Series and Heavy Duty Series bases, such as the Contractor Series 6kg Bollard Base
• Four Temporary Hazard Markers (T5-4)
• Two 450mm Stop Slow Bats
• More than 10 Black/Yellow Extendable Cone Bars
• One B-Class LED Arrow Board

Traffic cones, such as the 700mm Heavy Duty Traffic Cone, sit in the available tray space beside the cage.

The arrow board is supplied with its beacon brackets attached and fixes to the cage on two 1600mm mounting bars. Frames, signs, legs, bollards, bases and other equipment shown are sold separately.

The cage measures 1980mm long, 1650mm wide and 1215mm high. The 1650mm overall width includes the arrow board mounting bars and the stop/slow bat holder. The cage footprint is 1550mm wide.

Need more bollards? Design 16 holds 30 T-top bollard stems, with the bases carried in the tray space beside the cage.

Design 21 is one of more than 50 UAGS cage designs used across traffic control, civil construction, utility and council fleets. UAGS also fabricates custom cages matched to a specific vehicle, equipment list or crew workflow, and supplies complete traffic control vehicle fit-outs. Contact UAGS for custom cage design or fit-out details.

Bulky freight item. Contact us with your delivery address and we will quote the freight based on your actual delivery details. Made to order if out of stock (usually about 3.5 weeks). Contact us for current lead time.

• Bollard and Base Storage: Single-row hanger holds up to 10 T-top bollard stems, and three 450 x 150mm compartments hold three bollard bases each (9 in total), suiting Contractor Series and Heavy Duty Series bases.
• Design 7 Front Layout: The front section matches Design 7, our most popular cage, for frames, panels, legs, bats and the arrow board.
• Australian Made: Fully welded from 25 x 25mm SHS DuraGal steel with cold galvanising applied to the welds. UAGS has been building racking cages for more than 15 years.
• Sign Housings: Bent zinc-plated steel sheet sections hold corflute sign panels and multi-message frames during transport.
• Storage Capacity: Stores 25 multi-message frames, 600 x 600mm and 1200 x 300mm corflute panels, 60 Y-frame legs, four Temporary Hazard Markers, two stop/slow bats and more than 10 cone bars. Cones sit in the tray space beside the cage.
• Arrow Board Mounting: Two 1600mm mounting bars carry a B-Class arrow board (sold separately, supplied with beacon brackets attached).
• Fitment Options: We fit traffic racking cages at our Bayswater North depot in Victoria (contact us for a fitment quote), or the cage can be shipped Australia-wide.
• Custom Designs: One of more than 50 UAGS cage designs, with custom fabrication available by quote.

UAGS Fabricated Steel Warranty - 2-Year Limited Coverage
This product includes a 2-year limited warranty from UAG Services Pty Ltd covering manufacturing defects in the welded steel fabrication, including structural integrity, welds and bends, under normal use conditions.

This warranty does not cover wear and tear, rubbing, scuffing or wearing of the cold galvanising paint finish from normal handling, transport or storage, nor does it cover damage from misuse, impact, unauthorised modification or incorrect use.

To make a warranty claim, contact UAG Services Pty Ltd (Gate 2, 7 Royan Place, Bayswater North VIC 3153) at sales@uags.com.au or (03) 8750 0926 with your order reference, a description of the issue and photos of the product. Claims are subject to inspection and approval. Where a defect is confirmed, UAG Services Pty Ltd will repair, replace or refund the product at its discretion. Return shipping costs are handled in accordance with the UAGS Returns Policy unless otherwise required under Australian Consumer Law.

Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure. This warranty is provided in addition to these rights and does not limit or exclude them.