Class 1 Reflective Tape Yellow | 50mm | Per Metre
3M Marking Tape | Peel and Stick
Class 1 Reflective Tape Yellow | 50mm | Per Metre is backordered and will ship as soon as it is back in stock.
Pickup available at 7 Royan Place
Usually ready in 24 hours
Class 1 Reflective Tape Yellow | 50mm | Per Metre is backordered and will ship as soon as it is back in stock.
Description
Description
Class 1 Reflective Tape Yellow is a 3M retroreflective marking tape in vivid yellow, 50mm wide and sold by the metre. Applied to a clean surface it returns headlight beam back toward the driver, so marked trucks, trailers and equipment read brightly at night from the direction that matters.
The classic job is conspicuity marking: lines of tape along the sides and rear of trucks, trailers and large vehicles that make the vehicle outline readable after dark. The same tape marks tailgates and tray edges, racking, gate posts, bollards and plant that works or parks where vehicles move at night.
The tape is water resistant and non-corroding, with a peel-off backing for direct application. It holds best on smooth, clean, dry surfaces such as painted metal and aluminium; surface preparation makes more difference to tape life than anything else.
Sold per metre: order quantity 1 for one metre of tape, and multi-metre orders are supplied as one continuous length. Per-metre buying suits patch repairs, single fixtures and small jobs. For marking out a full vehicle or keeping workshop stock, the 45.7 metre roll works out cheaper per metre. For where reflective tape earns its keep on a work fleet, see our reflective tape guide.
Features
Features
- Retroreflective Visibility: Returns headlight beam toward the driver so marked vehicles and equipment read brightly at night.
- 3M Class 1 Material: Vivid yellow 3M marking tape sold under the long-standing Class 1 designation.
- Water Resistant: Non-corroding construction suited to exterior vehicle and equipment marking.
- Peel and Stick: Peel-off backing applies directly to clean, dry, smooth surfaces such as painted metal and aluminium.
- Sold Per Metre: Order quantity 1 for one metre. Multi-metre orders are supplied as one continuous length.
- Fleet Roll Available: The 45.7m roll covers full vehicle marking and workshop stock at a lower per-metre cost.
Specifications
Specifications
| Product Type | Retroreflective marking tape |
| SKU | RTY-1M-CLASS1 |
| Material | 3M Class 1 marking tape |
| Colour | Vivid yellow |
| Width | 50mm |
| Length | 1 metre (sold per metre) |
| Backing | Peel-off adhesive backing |
| Water Resistance | Water resistant, non-corroding |
Warranty
Warranty
30-Day Return - Consumable Product
This tape is a consumable marking product supplied by UAG Services Pty Ltd. Unused tape in its original condition may be returned within 30 days of purchase with proof of purchase for a refund or exchange in accordance with the UAGS Returns Policy. Because surface preparation and application are outside our control, no warranty applies to tape once it has been applied to a surface.
To arrange a return, contact UAG Services Pty Ltd (Gate 2, 7 Royan Place, Bayswater North VIC 3153) at sales@uags.com.au or (03) 8750 0926 with your order reference.
Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure. This warranty is provided in addition to these rights and does not limit or exclude them.
Reflective Tape FAQs
How is this tape sold?
How is this tape sold?
Per metre. Order quantity 1 for one metre of 50mm wide tape. Multi-metre orders are supplied as one continuous length, so an order of 5 arrives as a single 5 metre length. For larger jobs, the 45.7 metre roll is sold as a separate listing and works out cheaper per metre.
What surfaces does the tape stick to?
What surfaces does the tape stick to?
Smooth, clean, dry and sound surfaces such as painted metal and aluminium panels. It will not hold on flaking paint, rust, dust or heavily textured surfaces. Clean and dry the surface before removing the backing, press firmly along the full length, and avoid stretching the tape around curves.
Is the tape visible at night?
Is the tape visible at night?
Yes. The tape is retroreflective, so it returns light from vehicle headlights back toward the driver. By day the vivid yellow colour does the work instead.
Can I use this tape to replace the reflective band on a traffic cone?
Can I use this tape to replace the reflective band on a traffic cone?
No. Traffic control devices such as cones and barrier boards carry reflective elements that are specified by AS 1742.3, sized and positioned by the standard. This tape is for marking vehicles, plant and equipment.
Does this tape meet an Australian Standard?
Does this tape meet an Australian Standard?
Retroreflective material classes are defined in AS/NZS 1906.1. This tape is 3M material sold under the long-standing Class 1 marking tape designation. Where a project or fleet specification calls for a particular class of material, check the specification against the product before ordering.



