Oversize Load Ahead Sign | Manual Lift | Pilot Vehicle
Manual Lift | Pilot Vehicle Sign
Oversize Load Ahead Sign | Manual Lift | Pilot Vehicle is backordered and will ship as soon as it is back in stock.
Pickup available at 7 Royan Place
Usually ready in 24 hours
Oversize Load Ahead Sign | Manual Lift | Pilot Vehicle is backordered and will ship as soon as it is back in stock.
Description
Description
Oversize Load Ahead Sign | Manual Lift | Pilot Vehicle Sign is a double-sided vehicle-mounted sign used on pilot and escort vehicles to give road users advance warning that an oversize load is being moved. Both faces display OVERSIZE LOAD AHEAD, so the warning reads from in front of and behind the pilot vehicle.
The sign mounts to a roof rack, ute headboard or dedicated mounting point, with multiple mounting holes to suit different vehicle setups. Two gas struts lift the sign from its flat stowed position to upright, and the right-hand strut locks out to hold it raised during pilot operations. At the end of the movement the sign folds back flat for travel.
Raising and lowering is a one-person manual operation. There is no wiring or actuator to install or maintain, which keeps the sign simple to transfer between vehicles and quick to put into service.
The sign faces use Class 2 reflective material to AS 1906.1-2003 and the frame is powder coated steel for vehicle-mounted use. Removable beacon brackets are supplied for fitting warning beacons above the sign. They ship removed to keep the carton compact, so some assembly is required on arrival. Warning lights are sold separately.
For beacons to suit the supplied brackets, see the UAGS LED beacon range. The sign works alongside the rest of a pilot vehicle setup, including UHF communications and vehicle warning lighting.
In service, this sign runs on pilot and escort vehicles supporting oversize load movements, agricultural machinery transport, heavy equipment relocation and wide load escorts on public roads. Requirements for pilot vehicle signage vary by state and load class, so confirm the requirements that apply to your operation.
Bulky freight item. Checkout shows live carrier rates, which can be high for regional and remote deliveries. Before ordering for a remote area or in bulk, contact us for a freight quote and we will arrange the most economical option.
Features
Features
- Double-Sided Warning: OVERSIZE LOAD AHEAD reads from both directions on one sign.
- Manual Gas Strut Lift: Two struts raise the sign from flat to upright, with a right-hand lockout holding it deployed.
- Folds Flat For Travel: Stows flat at just 81mm high when not in use, no wiring or actuator needed.
- Class 2 Reflective Faces: Reflective sign material to AS 1906.1-2003 for day and night legibility.
- Flexible Mounting: Multiple mounting holes suit roof racks, ute headboards and custom mounts.
- Removable Beacon Brackets: Fit warning beacons above the sign. The brackets ship removed, so some assembly is required. Lights sold separately.
- Powder Coated Steel Frame: Finished for vehicle-mounted service.
Specifications
Specifications
| SKU | SIGN-OLA |
| Product Type | Oversize load ahead pilot vehicle sign |
| Sign Legend | OVERSIZE LOAD AHEAD |
| Sign Type | Double-sided |
| Sign Panel | 1200 x 600mm, 2mm thick |
| Overall Width | 1575mm with beacon brackets, 1330mm without |
| Height Deployed | 640mm, bottom of frame tube to top of sign |
| Height Stowed | 81mm |
| Depth Deployed | 440mm with beacon brackets, 375mm without |
| Depth Stowed | 690mm with beacon brackets, 625mm without |
| Weight | Approx. 17.5kg with beacon brackets (sign approx. 16kg, each bracket 760g including bolt) |
| Raised Angle | Approx. 73 to 75 degrees, leaning back |
| Mounting Holes | 12.5mm bolt holes along the front, at 1000mm centres |
| Operation | Manual lift, 2 gas struts |
| Lockout | Right-hand gas strut lockout |
| Reflective Material | Class 2 to AS 1906.1-2003 |
| Finish | Powder coated steel frame |
| Mounting | Roof rack or ute headboard, multiple mounting holes |
| Beacon Brackets | Removable, 165mm diameter beacon plates that slide into the frame tube ends, fixed with the supplied bolt. Shipped removed |
| Assembly | Some assembly required: fit the beacon brackets on arrival |
| Warning Lights | Not included, sold separately |
| Packed Size | 1390 x 700 x 110mm carton, 19.5kg |
| Application | Pilot and escort vehicle oversize load warning |
Warranty
Warranty
UAGS Traffic Control Equipment Warranty - 1-Year Limited Coverage
This product is supplied by UAG Services Pty Ltd and is covered by a 12-month limited warranty against defects in materials and workmanship under normal use conditions.
This warranty does not cover damage caused by incorrect installation, misuse, impact, modification, overloading, environmental exposure beyond normal vehicle use, or failure to secure the sign correctly during transport or operation.
To make a warranty claim, contact UAG Services Pty Ltd (Gate 2, 7 Royan Place, Bayswater North VIC 3153) at sales@uags.com.au or (03) 8750 0926 with your order reference, a description of the issue and photos of the product. Claims are subject to inspection and approval. Where a defect is confirmed, UAG Services Pty Ltd will repair, replace or refund the product at its discretion. Return shipping costs are handled in accordance with the UAGS Returns Policy unless otherwise required under Australian Consumer Law.
Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure. This warranty is provided in addition to these rights and does not limit or exclude them.
Oversize Load Ahead Sign FAQs
Does the sign include warning lights?
Does the sign include warning lights?
No. Removable beacon brackets are supplied for mounting warning beacons above the sign, and the beacons themselves are sold separately.
Does the sign need assembly?
Does the sign need assembly?
Some. The beacon brackets ship removed to keep the carton compact. On arrival, slide each 165mm beacon plate into the tube end of the frame and fix it with the supplied bolt. The sign ships in a 1390 x 700 x 110mm carton weighing 19.5kg.
How does the sign raise and lower?
How does the sign raise and lower?
Two gas struts lift the sign from its flat stowed position. The right-hand strut locks out to hold the sign upright, and releasing it folds the sign flat again. It is a manual one-person operation with no wiring.
What vehicles does it mount to?
What vehicles does it mount to?
Roof racks, ute headboards and dedicated mounting points, using the multiple mounting holes in the frame. The 12.5mm bolt holes along the front are at 1000mm centres, so check your rack or headboard span against that spacing before ordering.
Is this sign legal for pilot vehicle work in my state?
Is this sign legal for pilot vehicle work in my state?
Pilot and escort vehicle signage requirements vary by state and by load class. The sign faces use Class 2 reflective material to AS 1906.1-2003; confirm the signage requirements that apply to your operation with the relevant road authority or accreditation scheme.











