48W Amber LED Mini Light Bar | TIR Lens

The O4 is a compact mini LED light bar built for small trucks, utes and plant equipment where a full-size roof bar isn't needed or won't fit. Sixteen 3W amber LEDs (48W total) sit behind a TIR lens in a fully encapsulated housing measuring 228 x 171 x 67mm, with LED clusters positioned for 360 degree visibility from a low, flush profile.

Mounting is by strong magnetic feet for quick fit and removal, or a permanent fixed base if the light is staying put. Power comes via a 3m coil cable ending in a cigarette lighter plug with an inline on/off and flash pattern switch, so it runs straight off the vehicle's accessory socket with no wiring required.

Output runs across 19 flash patterns, and the unit accepts 10 to 30V DC, covering 12V and 24V vehicles and plant with the one part.

Supplied product data lists ECE R65 for the O4. Vehicle lighting requirements vary by vehicle type, registration category and jurisdiction, so confirm the requirements that apply to your vehicle and use.

The O4 is made by 911 Signal, the same manufacturer as the UAGS X6 and F3 warning light heads, though it's a different style of product: those are single-point heads for surface mounting on mirrors, guards or grilles, while the O4 is a self-contained plug-in bar with its own cable and mount.

• Compact Mini Housing: 228 x 171 x 67mm, low profile design that sits flush on the vehicle.
• 16 x 3W Amber LEDs (48W): High output behind a TIR lens for wide, even coverage.
• TIR Lens: Specially designed lens spreads light without a narrow hotspot.
• 360 Degree Coverage: LED clusters positioned around the housing for visibility from every angle.
• 19 Flash Patterns.
• Magnetic or Permanent Mount: Strong magnetic feet for quick fit and removal, or fix permanently through the base.
• 3m Coil Cable with Cigarette Plug: Plugs straight into the accessory socket, no wiring required.
• Inline On/Off and Pattern Switch: Control power and flash pattern from the cable, no separate controller box.
• Fully Encapsulated: Sealed housing resists moisture, vibration and corrosion.
• 10-30V DC Compatible: Suits 12V and 24V vehicles and plant with one part.

UAGS Warning Light Warranty - 3-Year Limited Coverage
This product is imported and branded by UAG Services Pty Ltd, which acts as the manufacturer of this item for warranty purposes. It is covered by a 3-year limited warranty against defects in materials and workmanship under normal use.

This warranty does not cover normal wear and tear, weathering or UV degradation, accidental or impact damage, water ingress caused by damaged seals not reported at delivery, incorrect or unauthorised installation, unauthorised modification, or use outside the product's stated voltage and operating conditions. Installation should be carried out by a qualified auto electrician; damage caused by DIY wiring is not covered.

To make a warranty claim, contact UAG Services Pty Ltd (Gate 2, 7 Royan Place, Bayswater North VIC 3153) at sales@uags.com.au or (03) 8750 0926 with your order reference, a description of the fault and photos of the product. Claims are subject to inspection and approval. Where a defect is confirmed, UAG Services Pty Ltd will repair, replace or refund the product at its discretion. Return shipping costs are handled in accordance with the UAGS Returns Policy unless otherwise required under Australian Consumer Law.

Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure. This warranty is provided in addition to these rights and does not limit or exclude them.