E4 12W LED Warning Light Head | TIR Lens

The E4 is a surface mount LED warning light head built around four 3W LEDs behind a TIR (total internal reflection) lens, giving a 12W LED array in a slim wedge housing. It signals vehicle presence on traffic control, civil, utility and fleet vehicles, plant and machinery, and is supplied as a single fixed output per unit: white, red, blue, or blue and red, selected at purchase.

At 146mm long the E4 is the larger of the two 12W four-LED heads UAGS stocks, with each LED sitting behind its own optical cell across the lens face. It surface mounts through two screw fixing points, one in each end flange, 133mm between centres, and a surface mount bracket is included. It suits grille surrounds, bull bars, guards, tray and body rails, headboards and rear body panels. Confirm mounting hardware and wiring with your auto electrician for your specific vehicle and application.

Output runs across 19 selectable flash patterns, and the head holds the last pattern selected when power is removed, so a fitted vehicle comes back on in the same setting. Up to 19 heads synchronise together, enough for a full front, side and rear set on one vehicle running as a single system. Input is 10 to 30V DC, covering 12V and 24V vehicles and plant with the one part, at a maximum draw of 9W.

Wiring runs on four cores: red for +12 to 24V DC power through a 3A fuse, black for chassis ground, white to set the head into flash group one or group two for simultaneous or alternating operation, and yellow for pattern selection and synchronisation. Momentarily applying positive to the yellow wire steps to the next pattern. Wiring should be carried out by a qualified auto electrician.

The housing is polycarbonate, measuring 146 x 45 x 24mm, and LED lifespan is rated at 100,000 hours.

Supplied product data lists the SAE-07-W-2 marking together with ECE R65 XA1 00 0026 and ECE R10 03 12468. Vehicle lighting requirements vary by vehicle type, registration category and jurisdiction, so confirm the requirements that apply to your vehicle and use.

The E4 sits alongside the other TIR heads in this range. The H4 12W LED warning light head is the same 12W four-LED output in a shorter 120mm oval housing, the X6 18W LED warning light head is the six-LED 18W head with a 180 degree lens, and the F3 9W mini LED warning light head is the smallest head in the range for tight spaces. For a wide angle reflex lens instead of forward-directed TIR optics, see the C4 12W LED warning light head, and for a linear lens see the HL6 18W white LED warning light head. For amber warning output on traffic control and civil vehicles, see the UAGS-branded U30-6, U30-12A and U31 light heads.

• 4 x 3W LEDs (12W Array): Each LED behind its own optical cell across the lens face.
• TIR Optics: Total internal reflection lens directs output forward rather than scattering it.
• 19 Flash Patterns: Stepped through from the yellow wire.
• Pattern Memory: Holds the last pattern selected when power is removed.
• Synchronisation Up To 19 Heads: Enough for a full front, side and rear set running as one system.
• Two Flash Groups: The white wire sets each head to group one or group two for simultaneous or alternating flash.
• 10-30V DC: Suits 12V and 24V vehicles and plant with one part, 9W maximum draw.
• Surface Mount: Two screw fixing points, one in each end flange, 133mm between centres. Bracket included.
• 146mm Housing: Polycarbonate, 146 x 45 x 24mm, the larger of the two 12W four-LED heads UAGS stocks.
• 100,000 Hour LED Lifespan.
• Approvals: SAE-07-W-2 marking, ECE R65 XA1 00 0026 and ECE R10 03 12468.
• Four Output Colours: White, red, blue, or blue and red, each sold as its own variant.

UAGS Warning Light Warranty - 3-Year Limited Coverage
This product is imported and branded by UAG Services Pty Ltd, which acts as the manufacturer of this item for warranty purposes. It is covered by a 3-year limited warranty against defects in materials and workmanship under normal use.

This warranty does not cover normal wear and tear, weathering or UV degradation, accidental or impact damage, water ingress caused by damaged seals not reported at delivery, incorrect or unauthorised installation, unauthorised modification, or use outside the product's stated voltage and operating conditions. Installation should be carried out by a qualified auto electrician; damage caused by DIY wiring is not covered.

To make a warranty claim, contact UAG Services Pty Ltd (Gate 2, 7 Royan Place, Bayswater North VIC 3153) at sales@uags.com.au or (03) 8750 0926 with your order reference, a description of the fault and photos of the product. Claims are subject to inspection and approval. Where a defect is confirmed, UAG Services Pty Ltd will repair, replace or refund the product at its discretion. Return shipping costs are handled in accordance with the UAGS Returns Policy unless otherwise required under Australian Consumer Law.

Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure. This warranty is provided in addition to these rights and does not limit or exclude them.