LED Traffic Marshalling Wand | 340mm | Waterproof, Multi-Mode
340mm | LED Traffic Marshalling Wand
LED Traffic Marshalling Wand | 340mm | Waterproof, Multi-Mode is backordered and will ship as soon as it is back in stock.
Pickup available at 7 Royan Place
Usually ready in 24 hours
LED Traffic Marshalling Wand | 340mm | Waterproof, Multi-Mode is backordered and will ship as soon as it is back in stock.
Description
Description
The 340mm LED Traffic Marshalling Wand is the standard handheld signalling wand for traffic control, aviation ground crew and marshalling work, giving traffic controllers, marshalls, emergency services and airport ground crews a longer, brighter hand signal for directing vehicles, aircraft and pedestrians in low light and after dark.
The wand is held and operated with one hand via the non-slip handle, with a waterproof end-cap switch stepping through the flash modes. A magnetic base and hand lanyard let it attach to a vehicle, sign frame or trailer for hands-free use, or be carried securely between tasks.
A commercial-grade LED lights the 182mm red illuminated tube section, rated by the manufacturer for visibility beyond 1km, with up to 130 hours of runtime in the flash modes and around 70 hours on steady, from 2 x C batteries (not included). Four modes are available: off, slow flash, fast flash and steady on. Current Austroads temporary traffic management guidance describes a red illuminated wand supplementing the stop slow bat during night works, which is the role this wand fills for traffic control crews.
The 342mm housing is reinforced PP/PC plastic with an IP67 waterproof switch and battery compartment, spring-loaded stainless steel battery terminals and an epoxy-coated circuit board for corrosion resistance, and the wand is drop-tested by the manufacturer to 5 metres. This build suits repeated outdoor use in wet weather and roadside conditions where the shorter 260mm LED Traffic Marshalling Wand is not waterproof rated.
For everyday traffic control, aviation ground crew and event marshalling duties, most crews standardise on this 340mm wand for its longer reach, waterproof housing and drop-tested build. The shorter 260mm wand suits lighter duties, such as a glovebox spare or a back-up wand carried alongside the main kit.
Common uses include traffic control and marshalling on roadwork sites and lane closures, night works alongside the stop slow bat, aircraft and ground crew signalling, event and crowd control, and other worksite direction where a longer-range, weatherproof handheld wand is needed.
Features
Features
- Red LED Signalling Tube: 182mm red illuminated section on a 342mm wand for longer-range hand signalling.
- Night Works Role: Current Austroads guidance describes a red illuminated wand supplementing the stop slow bat during night works.
- Four Flash Modes: Off, slow flash, fast flash and steady on, switched at the waterproof end-cap.
- IP67 Waterproof Switch And Battery Housing: Sealed against rain and wash-down conditions.
- Drop-Tested To 5 Metres: Manufacturer tested to survive 5 metre drops, built for hard roadside knocks.
- Magnetic Base: Attaches to a vehicle, sign frame or trailer for hands-free use.
- Reinforced PP/PC Body: Impact-resistant housing with stainless steel spring-loaded battery terminals and an epoxy-coated circuit board.
- Up To 130 Hours Runtime: Manufacturer rated at up to 130 hours in the flash modes and around 70 hours steady on, from 2 x C batteries (not included).
- Hand Lanyard Included: Secures the wand to the wrist during carry and use.
Specifications
Specifications
| Model | TWAND340 |
| Product Type | Handheld LED marshalling wand |
| Length | 342mm |
| Tube Diameter | 33mm, flaring to 45mm at the handle |
| Tube Length | 182mm |
| Handle Length | 160mm including the magnetic base |
| Housing Material | Reinforced PP/PC plastic |
| Lens Colour | Red |
| Functions | 4 modes: off, slow flash (3Hz), fast flash (6Hz), steady on |
| Brightness | 18 lumens (manufacturer rated) |
| Ingress Protection | IP67 waterproof switch and battery compartment |
| Drop Resistance | 5 metres (manufacturer tested) |
| Power Supply | 2 x C batteries (not included) |
| Battery Life | Up to 130 hours in flash modes, around 70 hours steady on (manufacturer rated) |
| Working Voltage | 1.9V to 3.2V |
| Current Draw | 30 to 210mA |
| Visibility | Over 1km (manufacturer rated) |
| LED Lifespan | Over 100,000 hours |
| Switch Life | Over 100,000 cycles |
| Included Components | Hand lanyard, magnetic base |
| Weight | Approx. 200g with magnetic base, without batteries |
| Operating Temperature | -20 degrees C to +60 degrees C |
| Certification | CE marked |
| Application | Traffic control, night works, aviation ground crew, event marshalling and worksite signalling |
Warranty
Warranty
This product is covered by a 1-year warranty from UAG Services Pty Ltd or the original manufacturer, covering defects in materials and workmanship under normal use conditions.
Traffic control equipment must be used, stored and maintained correctly. This warranty does not cover damage resulting from incorrect use, impact damage, modification, poor storage, normal wear and tear, misuse, or exposure beyond the product's intended operating conditions.
To make a warranty claim, contact UAG Services Pty Ltd (Gate 2, 7 Royan Place, Bayswater North VIC 3153) at sales@uags.com.au or (03) 8750 0926 with your order reference, a description of the issue and photos of the product. UAGS will refer the claim to the manufacturer or authorised representative where required. Return shipping costs are handled in accordance with the UAGS Returns Policy unless otherwise required under Australian Consumer Law.
Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure. This warranty is provided in addition to these rights and does not limit or exclude them.
LED Marshalling Wand FAQs
What is the difference between this and the 260mm wand?
What is the difference between this and the 260mm wand?
This 340mm wand is longer and waterproof rated (IP67), making it the wand most crews standardise on for everyday traffic control, aviation ground crew and event marshalling duties. The 260mm LED Traffic Marshalling Wand is lighter and more compact, with a built-in torch function this 340mm model does not have.
Can this wand be used for night traffic control alongside a stop slow bat?
Can this wand be used for night traffic control alongside a stop slow bat?
Yes, that is its main traffic control role. Current Austroads temporary traffic management guidance describes a red illuminated wand supplementing the stop slow bat during night works, and this wand's red illuminated tube fills that role. Night requirements vary by state, so confirm your setup against the applicable TGS and authority requirements.
Is this wand only used for road traffic control?
Is this wand only used for road traffic control?
No. It is also used for aviation ground crew and aircraft marshalling, event and crowd control, and other worksite direction, anywhere a longer-range, weatherproof handheld wand is needed.
Is this wand waterproof?
Is this wand waterproof?
Yes. The switch and battery compartment are IP67 rated, sealed against rain and wash-down conditions.
Are batteries included?
Are batteries included?
No. This wand runs on 2 x C batteries, sold separately.
Can this wand be used hands-free?
Can this wand be used hands-free?
Yes. The magnetic base attaches to a vehicle, sign frame or other metal surface for hands-free use.









