Red & White Double-Sided Barrier Tape | 75mm x 100m

Red & White Double-Sided Barrier Tape is a non-adhesive polyethylene tape printed with red and white diagonal stripes on both sides, 75mm wide and 100 metres to the roll. Strung between star pickets, fencing, bollards or any fixed points, it puts a highly visible boundary around a hazard, an excavation, a storage area or a no-go corner of a site in seconds.

The double-sided print is the practical difference: the stripes read from either direction, so the line works whichever side someone approaches from. The UV-resistant print and polyethylene construction suit outdoor use in Australian conditions, and the non-adhesive design means the tape ties off, unrolls fast and comes down just as quickly at the end of the job.

Barrier tape is a visual cue, not a physical barrier. AS 1742.3 is specific that barrier boards or tapes shall not be used for pedestrian containment adjacent to moving traffic; that job belongs to proper channelizing devices and fencing under the traffic guidance scheme. Where the message needs to be blunter, the DANGER printed version of this tape carries the legend in bold black.

For the difference between barrier tape and retroreflective marking tape, see our reflective tape guide.

• Printed Both Sides: Red and white diagonal stripes read from either direction of approach.
• Non-Adhesive Roll: Ties off between fixed points, unrolls fast and comes down clean at the end of the job.
• UV-Resistant Print: Heavy-duty polyethylene with UV-resistant ink for outdoor Australian conditions.
• 75mm x 100m: Full-width tape with enough length on the roll to cordon a serious work area.
• Site Workhorse: Hazard marking, excavations, storage areas and no-go boundaries on construction, civil and event sites.
• DANGER Version Available: The same roll format with a printed DANGER legend for blunter messaging.

30-Day Return - Consumable Product
This tape is a consumable site product supplied by UAG Services Pty Ltd. Unused tape in its original condition may be returned within 30 days of purchase with proof of purchase for a refund or exchange in accordance with the UAGS Returns Policy. Because deployment conditions are outside our control, no warranty applies to tape once it has been used.

To arrange a return, contact UAG Services Pty Ltd (Gate 2, 7 Royan Place, Bayswater North VIC 3153) at sales@uags.com.au or (03) 8750 0926 with your order reference.

Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure. This warranty is provided in addition to these rights and does not limit or exclude them.