24W Amber LED Warning Beacon | Fixed Mount

The UAGS U4-24 24W amber LED warning beacon provides 360-degree amber hazard warning from a fixed mounting position on work vehicles and plant equipment. It is the higher-output beacon in the U4 series, suited to traffic control vehicles, trucks, forklifts, excavators and heavy machinery working in roadworks, construction and site environments.

The beacon installs on an aluminium three-point base with the mounting gasket included, fixing to vehicle roofs, cab guards, tray brackets and plant bodywork. UAGS also stocks angled, disc and plate beacon mounting brackets suiting beacons up to 170mm diameter.

Light output comes from 24 x 1 watt LEDs behind an amber polycarbonate lens, producing 360-degree amber coverage. There are 18 selectable modes: ECE compliant single, double, quad and rotate flashes at 120 FPM, SAE compliant equivalents at 75 FPM (each in two phase settings), plus steady on and off, per the supplied product data. Pattern selection runs through the pattern wire, brightness can be reduced for night work through the dimming function, and multiple units synchronise through the sync wire.

Multivolt 10-30V DC operation suits both 12V and 24V vehicle electrical systems, with a maximum current draw of 2.6A at 13.8V DC.

The aluminium base and polycarbonate lens carry an IP65 ingress protection rating, suiting exposed mounting positions subject to dust, water and vibration. The unit weighs 0.6kg.

The supplied product data lists ECE R65 and SAE Class 2. These certifications relate to light output performance as per the supplied product data.

For a lower-profile beacon in the same series, see the U4-12 12W Amber LED Warning Beacon; for the highest output in the range, see the U7-24 48W Amber LED Flashing Beacon.

Commonly fitted to traffic control vehicles, civil fleet vehicles, utility vehicles and plant equipment. Vehicle lighting requirements may vary by vehicle type, registration category, jurisdiction and intended use. Vehicle warning systems support visibility but do not replace a traffic management plan or traffic guidance scheme.

• 24 x 1W LED Configuration: 360-degree amber output through an amber polycarbonate lens
• 18 Flash Modes: ECE compliant flashes at 120 FPM and SAE compliant flashes at 75 FPM in two phase settings each, plus steady on, per supplied data
• Dimming Function: brightness reduces for night operation
• Synchronisation: multiple units synchronise via the sync wire for coordinated flashing
• Multivolt Operation: 10-30V DC input suits 12V and 24V vehicle electrical systems, 2.6A maximum at 13.8V DC
• Three-Point Fixed Base: aluminium base with mounting gasket included for vibration-resistant installation
• IP65 Construction: sealed against dust and water for exposed mounting positions, 0.6kg
• Certified Output: supplied product data lists ECE R65 and SAE Class 2
• Fleet Application: traffic control vehicles, trucks, forklifts, excavators and plant equipment

UAGS Warning Light Warranty - 3-Year Limited Coverage
This product is imported and branded by UAG Services Pty Ltd, which acts as the manufacturer of this item for warranty purposes. It is covered by a 3-year limited warranty against defects in materials and workmanship under normal use.

This warranty does not cover normal wear and tear, weathering or UV degradation, accidental or impact damage, water ingress caused by damaged seals not reported at delivery, incorrect or unauthorised installation, unauthorised modification, or use outside the product's stated voltage and operating conditions. Installation should be carried out by a qualified auto electrician; damage caused by DIY wiring is not covered.

To make a warranty claim, contact UAG Services Pty Ltd (Gate 2, 7 Royan Place, Bayswater North VIC 3153) at sales@uags.com.au or (03) 8750 0926 with your order reference, a description of the fault and photos of the product. Claims are subject to inspection and approval. Where a defect is confirmed, UAG Services Pty Ltd will repair, replace or refund the product at its discretion. Return shipping costs are handled in accordance with the UAGS Returns Policy unless otherwise required under Australian Consumer Law.

Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure. This warranty is provided in addition to these rights and does not limit or exclude them.