{"title":"Vehicle Warning Lights","description":"\u003cp\u003eUAGS supplies vehicle warning lights for traffic control vehicles, civil fleets, utility vehicles, trucks, plant and vehicle fitout applications. The range includes LED beacons, roof lightbars, surface mount warning lights, warning light bars and related mounting components.\u003c\/p\u003e\n\n\u003cp\u003eUse the category links to narrow the range, or check each product page for light colour, voltage, dimensions, mounting method, flash patterns, environmental rating and included components before ordering.\u003c\/p\u003e","products":[{"product_id":"o4-48w-9in-mini-light-bar","title":"48W Amber LED Mini Light Bar | TIR Lens","description":"\u003cp\u003eThe \u003cstrong\u003eO4\u003c\/strong\u003e is a compact mini LED light bar built for small trucks, utes and plant equipment where a full-size roof bar isn't needed or won't fit. Sixteen 3W amber LEDs (48W total) sit behind a TIR lens in a fully encapsulated housing measuring 228 x 171 x 67mm, with LED clusters positioned for 360 degree visibility from a low, flush profile.\u003c\/p\u003e\u003cp\u003eMounting is by strong magnetic feet for quick fit and removal, or a permanent fixed base if the light is staying put. Power comes via a 3m coil cable ending in a cigarette lighter plug with an inline on\/off and flash pattern switch, so it runs straight off the vehicle's accessory socket with no wiring required.\u003c\/p\u003e\u003cp\u003eOutput runs across 19 flash patterns, and the unit accepts 10 to 30V DC, covering 12V and 24V vehicles and plant with the one part.\u003c\/p\u003e\u003cp\u003eSupplied product data lists ECE R65 for the O4. Vehicle lighting requirements vary by vehicle type, registration category and jurisdiction, so confirm the requirements that apply to your vehicle and use.\u003c\/p\u003e\u003cp\u003eThe O4 is made by 911 Signal, the same manufacturer as the UAGS \u003ca href=\"\/products\/x6-18w-led-warning-light-head-with-tir-lens\"\u003e\u003cstrong\u003eX6\u003c\/strong\u003e\u003c\/a\u003e and \u003ca href=\"\/products\/f3-9w-mini-led-warning-light-head\"\u003e\u003cstrong\u003eF3\u003c\/strong\u003e\u003c\/a\u003e warning light heads, though it's a different style of product: those are single-point heads for surface mounting on mirrors, guards or grilles, while the O4 is a self-contained plug-in bar with its own cable and mount.\u003c\/p\u003e","brand":"911 Signal","offers":[{"title":"Default Title","offer_id":42197168750676,"sku":"O4MLB-A","price":226.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0641\/7389\/9860\/files\/011201A_b4c89fa0-0864-44c5-aa61-a8f906cadd2d.jpg?v=1751359736"},{"product_id":"b-class-led-arrow-board-single-sided-vehicle-mounted","title":"B Class LED Arrow Board Single Sided","description":"\u003cp\u003eThe \u003cstrong\u003eB Class LED Arrow Board Single Sided\u003c\/strong\u003e is a vehicle-mounted B Class LED traffic control arrow board used for rear-facing directional guidance and hazard warning on traffic control vehicles, civil fleet vehicles, utility vehicles, contractor vehicles and temporary traffic management vehicle fitouts. It is used where traffic approaching from behind the vehicle needs clear directional or caution information during roadworks, lane closures, mobile works, roadside works, utility works and civil works.\u003c\/p\u003e\n\u003cp\u003eThis arrow board conforms to AS 4192-2006 and is NSW RTA \/ RMS FAS\/5 Type Approved, with testing completed by a NATA-accredited laboratory as part of the FAS\/5 approval process. Standards compliance and Type Approval do not make a vehicle, worksite, traffic management plan, traffic guidance scheme or traffic setup compliant on their own. Product selection, installation and use should be confirmed against the supplied product documentation, current standards, project requirements, applicable traffic management documentation and road authority conditions.\u003c\/p\u003e\n\u003cp\u003eThe arrow board may be fitted to a suitable cabin rack, traffic control cage, tray headboard, tray-mounted frame, rear tray structure or other compatible vehicle mounting structure. Final mounting must be confirmed against the vehicle setup, mounting structure, project requirements and applicable traffic management documentation. Installation must be completed by a qualified auto electrician.\u003c\/p\u003e\n\u003cp\u003eThe single-sided board has a 1500mm x 770mm display area, a 1545mm x 770mm mounting footprint and 15 LED clusters with luminous intensity greater than 700 cd. Display modes include Arrow Left, Arrow Right, Double Arrow and Hazard, with Hazard mode used as the non-directional warning \/ flashing corner mode. The flash rate is 35–45 cycles per minute.\u003c\/p\u003e\n\u003cp\u003eThe in-cabin touch controller has illuminated buttons and a swivel mounting bracket. Controller buttons include On\/Off, Work Light, Beacon, Raise, Lower, Arrow Left, Arrow Right, Double Arrow and Hazard. The controller uses illuminated button feedback, with green for standby \/ ready and red for active functions. The electric actuator allows the board to be raised and lowered from inside the cabin.\u003c\/p\u003e\n\u003cp\u003eThe arrow board is supplied standard with a 12V DC actuator, with a 24V DC actuator available on request for suitable 24V vehicle systems. Confirm the required vehicle voltage before ordering. The integrated light sensor supports automatic dimming for day and night operation. The system includes short-circuit protection, solid-state circuitry, low-voltage monitoring, reverse polarity protection, over-voltage protection and fail-safe behaviour that defaults to Hazard mode during communication loss or low-voltage fault.\u003c\/p\u003e\n\u003cp\u003eThe enclosure is IP54 rated and uses a weather-resistant vented design to assist with internal air movement and condensation management. The product is assembled in Australia using locally manufactured structural components with imported electrical systems and actuator hardware, supporting practical servicing and integration into UAGS traffic control vehicle fitouts.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBulky freight item.\u003c\/strong\u003e Checkout shows live carrier rates, which can be high for regional and remote deliveries. Before ordering for a remote area or in bulk, contact us for a freight quote and we will arrange the most economical option.\u003c\/p\u003e","brand":"UAG Services","offers":[{"title":"Default Title","offer_id":42197169045588,"sku":"AB-BCLASS-1500-15-S","price":3300.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0641\/7389\/9860\/files\/BCLASSAB_f03a203d-5064-4dc0-8411-997c1bb72b53.jpg?v=1751359785"},{"product_id":"c4-2-24w-10in-led-warning-light-bar","title":"C4-2 24W 10in LED Warning Light Bar","description":"\u003ch2\u003e10 inch LED Warning Light Bar\u003c\/h2\u003e\n\n\u003ch4\u003eModel: C4-2\u003c\/h4\u003e\n\n\u003cp\u003eThe C4-2 24W 10-Inch Ultra-Slim LED Warning Light Bar is engineered for traffic control vehicles, emergency services, tow trucks, ambulances, police, fire vehicles, and heavy machinery. Featuring advanced reflex lens technology and eight high-intensity 3W Gen III LEDs, this light bar delivers exceptional brightness in a sleek, 1-inch-thick waterproof design. With 26 customizable flash patterns and compliance with SAE J595 Class 1 and ECE R65 standards, it ensures maximum visibility and safety. Its internal self-contained electronics simplify installation, requiring only basic wiring (black to ground, red for on\/off, yellow for pattern change). Rugged, reliable, and versatile, the C4-2 is ideal for professionals who demand performance without compromise.\u003c\/p\u003e\n\n\u003cdiv class=\"productdetails\" style=\"box-sizing: border-box; margin-top: 20px; font-family: Roboto, Helvetica, Arial, sans-serif; font-size: 14px;\"\u003e\n\u003ch3 style=\"box-sizing: border-box; font-weight: 700; line-height: 1.1; margin-top: 0px; margin-bottom: 10px; font-size: 20px; text-transform: uppercase;\"\u003eFEATURES \/ SPECIFICATIONS\u003c\/h3\u003e\n\n\u003cul style=\"box-sizing: border-box; margin-top: 0px; margin-bottom: 10px;\"\u003e\n\t\u003cli style=\"box-sizing: border-box;\"\u003ePatterns: 26\u003c\/li\u003e\n\t\u003cli style=\"box-sizing: border-box;\"\u003eSize: 254 (10in) x 56 x 25 mm\u003c\/li\u003e\n\t\u003cli style=\"box-sizing: border-box;\"\u003eLens: REFLEX\u003c\/li\u003e\n\t\u003cli style=\"box-sizing: border-box;\"\u003eLEDs: 3W x 8 PCS Gen III\u003c\/li\u003e\n\t\u003cli style=\"box-sizing: border-box;\"\u003eVoltage: 12-24VDC\u003c\/li\u003e\n\t\u003cli style=\"box-sizing: border-box;\"\u003eStandards: SAE J595, CLASS 1, ECE R65\u003c\/li\u003e\n\t\u003cli style=\"box-sizing: border-box;\"\u003eLED Colour: AMBER, WHITE\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n","brand":"911 Signal","offers":[{"title":"AMBER","offer_id":42197170258004,"sku":"040101A","price":114.4,"currency_code":"AUD","in_stock":true},{"title":"WHITE","offer_id":42197170356308,"sku":"040101W","price":114.4,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0641\/7389\/9860\/files\/P_338747099_afb3d4e2-ca03-49f3-a07b-0b50c5f447a8.jpg?v=1751360044"},{"product_id":"c4-12w-led-warning-light-head","title":"C4 12W LED Warning Light Head | Reflex Lens","description":"\u003cp\u003eThe \u003cstrong\u003eC4\u003c\/strong\u003e is a surface mount LED warning light head built around four 3W LEDs behind a reflex lens, giving a 12W LED array in a compact 117mm housing. Where the TIR heads in this range send output forward through separate optical cells, the C4 uses a reflector behind each LED to spread light off-axis, so it stays visible from a much wider angle. It signals vehicle presence on traffic control, civil, utility and fleet vehicles, plant and machinery.\u003c\/p\u003e\n\n\u003cp\u003eSix output colours are stocked, the widest choice in the range: white, red, blue, green, blue and red, or red and white. On the two-colour units the LEDs are split, two of each colour across the lens.\u003c\/p\u003e\n\n\u003cp\u003eThe C4 surface mounts through two screw fixing points, one in each end lug, 104mm between centres. It suits bumpers, grille surrounds, bull bars, guards, tray and body rails, headboards and rear body panels. Confirm mounting hardware and wiring with your auto electrician for your specific vehicle and application.\u003c\/p\u003e\n\n\u003cp\u003eOutput runs across 19 selectable flash patterns at a flash rate of 1 to 4Hz. Input is 10 to 30V DC, covering 12V and 24V vehicles and plant with the one part, at a maximum draw of 9W. Wiring runs on four cores: red for +12 to 24V DC power through a 3A fuse, black for chassis ground, white to set the head into flash group one or group two for simultaneous or alternating operation, and yellow for pattern selection and synchronisation. Connecting the yellow wires of several heads together synchronises their flash. Wiring should be carried out by a qualified auto electrician.\u003c\/p\u003e\n\n\u003cp\u003eThe head is built on an aluminium base, sealed to IP68 and rated for ambient temperatures from -20 to +65 degrees, suited to exposed mounting positions on vehicles working in vibration, dust and weather. LED lifespan is rated at 100,000 hours. Overall size is 117 x 30 x 28mm.\u003c\/p\u003e\n\n\u003cp\u003eSupplied product data lists ECE R65 XA1 00 0036, ECE R65 XB1 00 0035 and ECE R10 04 12754. Vehicle lighting requirements vary by vehicle type, registration category and jurisdiction, so confirm the requirements that apply to your vehicle and use.\u003c\/p\u003e\n\n\u003cp\u003eThe C4 is the wide angle reflex head in this range. For forward-directed TIR output, the \u003ca href=\"\/products\/h4-12w-led-warning-light-head\"\u003e\u003cstrong\u003eH4 12W LED warning light head\u003c\/strong\u003e\u003c\/a\u003e and the longer \u003ca href=\"\/products\/e4-12w-led-warning-light-head\"\u003e\u003cstrong\u003eE4 12W LED warning light head\u003c\/strong\u003e\u003c\/a\u003e are the same 12W four-LED format with a TIR lens, and the \u003ca href=\"\/products\/x6-18w-led-warning-light-head-with-tir-lens\"\u003e\u003cstrong\u003eX6 18W LED warning light head\u003c\/strong\u003e\u003c\/a\u003e steps up to six LEDs. The \u003ca href=\"\/products\/e3-9w-led-warning-light-head\"\u003e\u003cstrong\u003eE3 9W LED warning light head\u003c\/strong\u003e\u003c\/a\u003e is the smallest and lowest draw head in the range, and the \u003ca href=\"\/products\/hl6-18w-led-warnign-light-head\"\u003e\u003cstrong\u003eHL6 18W white LED warning light head\u003c\/strong\u003e\u003c\/a\u003e uses a linear lens instead. For more output from the same reflex optics, see the 27W \u003ca href=\"\/products\/c9-27w-led-warning-light-head\"\u003e\u003cstrong\u003eC9\u003c\/strong\u003e\u003c\/a\u003e. For amber warning output on traffic control and civil vehicles, see the UAGS-branded \u003ca href=\"\/products\/u30-6a-w-ultra-slim-led-warning-light\"\u003e\u003cstrong\u003eU30-6\u003c\/strong\u003e\u003c\/a\u003e, \u003ca href=\"\/products\/u30-12a-ultra-slim-12w-amber-led-warning-light\"\u003e\u003cstrong\u003eU30-12A\u003c\/strong\u003e\u003c\/a\u003e and \u003ca href=\"\/products\/180deg-dimmable-amber-warning-light-head-6w-led\"\u003e\u003cstrong\u003eU31\u003c\/strong\u003e\u003c\/a\u003e light heads.\u003c\/p\u003e","brand":"911 Signal","offers":[{"title":"WHITE","offer_id":42197175861332,"sku":"020101W","price":79.0,"currency_code":"AUD","in_stock":true},{"title":"RED","offer_id":42197175894100,"sku":"020101R","price":79.0,"currency_code":"AUD","in_stock":true},{"title":"BLUE","offer_id":42197175926868,"sku":"020101B","price":79.0,"currency_code":"AUD","in_stock":true},{"title":"GREEN","offer_id":42197175959636,"sku":"020101G","price":79.0,"currency_code":"AUD","in_stock":true},{"title":"BLUE\/RED","offer_id":42197175992404,"sku":"020101BR","price":79.0,"currency_code":"AUD","in_stock":true},{"title":"RED\/WHITE","offer_id":42197176025172,"sku":"020101RW","price":79.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0641\/7389\/9860\/files\/c4-12w-led_warning_lighthead-main-01.webp?v=1785066351"},{"product_id":"c9-27w-led-warning-light-head","title":"C9 27W LED Warning Light Head | 180 Degree Reflex Lens","description":"\u003cp\u003eThe \u003cstrong\u003eC9\u003c\/strong\u003e is the highest output surface mount head in this range, built around nine 3W LEDs behind a curved reflex lens for a 27W LED array. The housing curves through its length so the reflectors throw light across roughly 180 degrees rather than straight ahead, which is what makes it the head to choose where a vehicle needs to be seen from the side as much as head on, at intersections, on approaches and in bumper and grille positions.\u003c\/p\u003e\n\n\u003cp\u003eFour output colours are stocked: white, red, blue, or blue and red. On the two-colour unit the LEDs are split across the lens.\u003c\/p\u003e\n\n\u003cp\u003eThe C9 surface mounts through two screw fixing points, one in each end lug, 162mm between centres, and the head is 174mm long overall. Drill two holes in the mounting surface and fix with two screws. Confirm mounting hardware and wiring with your auto electrician for your specific vehicle and application.\u003c\/p\u003e\n\n\u003cp\u003eOutput runs across 19 selectable flash patterns at a flash rate of 1 to 4Hz, and the head holds the last pattern selected when power is removed. Input is 10 to 33V DC, covering 12V and 24V vehicles and plant with the one part, at a maximum draw of 13W. Wiring runs on four cores: red for +12 to 24V DC power through a 3A fuse, black for chassis ground, white to set the head into flash group one or group two for simultaneous or alternating operation, and yellow for pattern selection and synchronisation. Connecting the yellow wires of several heads together synchronises their flash. Wiring should be carried out by a qualified auto electrician.\u003c\/p\u003e\n\n\u003cp\u003eThe head is built on a black aluminium base with a polycarbonate lens, sealed to IP67 and rated for ambient temperatures from -20 to +65 degrees, suited to exposed mounting positions on vehicles working in vibration, dust and weather. LED lifespan is rated at 100,000 hours. Overall size is 174 x 52.5 x 37.5mm.\u003c\/p\u003e\n\n\u003cp\u003eSupplied product data lists ECE R65 XA1 00 0039 and ECE R10 05 1864. Vehicle lighting requirements vary by vehicle type, registration category and jurisdiction, so confirm the requirements that apply to your vehicle and use.\u003c\/p\u003e\n\n\u003cp\u003eWithin this range the C9 is the largest and brightest head. The \u003ca href=\"\/products\/c4-12w-led-warning-light-head\"\u003e\u003cstrong\u003eC4 12W LED warning light head\u003c\/strong\u003e\u003c\/a\u003e is the smaller four-LED reflex head at 117mm for tighter positions. For forward-directed TIR output instead of wide angle reflex, see the \u003ca href=\"\/products\/h4-12w-led-warning-light-head\"\u003e\u003cstrong\u003eH4\u003c\/strong\u003e\u003c\/a\u003e and \u003ca href=\"\/products\/e4-12w-led-warning-light-head\"\u003e\u003cstrong\u003eE4\u003c\/strong\u003e\u003c\/a\u003e 12W heads, or the \u003ca href=\"\/products\/e3-9w-led-warning-light-head\"\u003e\u003cstrong\u003eE3\u003c\/strong\u003e\u003c\/a\u003e at 9W. The \u003ca href=\"\/products\/x6-18w-led-warning-light-head-with-tir-lens\"\u003e\u003cstrong\u003eX6 18W LED warning light head\u003c\/strong\u003e\u003c\/a\u003e also gives a 180 degree viewing angle, from a much smaller 90mm housing with a TIR lens, and is the head UAGS continues to stock in depth across amber, white, red, blue and blue\/red. For amber warning output on traffic control and civil vehicles, see the UAGS-branded \u003ca href=\"\/products\/u30-6a-w-ultra-slim-led-warning-light\"\u003e\u003cstrong\u003eU30-6\u003c\/strong\u003e\u003c\/a\u003e, \u003ca href=\"\/products\/u30-12a-ultra-slim-12w-amber-led-warning-light\"\u003e\u003cstrong\u003eU30-12A\u003c\/strong\u003e\u003c\/a\u003e and \u003ca href=\"\/products\/180deg-dimmable-amber-warning-light-head-6w-led\"\u003e\u003cstrong\u003eU31\u003c\/strong\u003e\u003c\/a\u003e light heads.\u003c\/p\u003e","brand":"911 Signal","offers":[{"title":"WHITE","offer_id":42197179433044,"sku":"020104W","price":100.8,"currency_code":"AUD","in_stock":true},{"title":"RED","offer_id":42197179465812,"sku":"020104R","price":100.8,"currency_code":"AUD","in_stock":true},{"title":"BLUE","offer_id":42197179498580,"sku":"020104B","price":100.8,"currency_code":"AUD","in_stock":true},{"title":"BLUE\/RED","offer_id":42197179531348,"sku":"020104BR","price":100.8,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0641\/7389\/9860\/files\/c9-27w-led_warning_lighthead-main-02.webp?v=1785068771"},{"product_id":"e3-9w-led-warning-light-head","title":"E3 9W LED Warning Light Head | TIR Lens","description":"\u003cp\u003eThe \u003cstrong\u003eE3\u003c\/strong\u003e is the entry point into this range of surface mount warning light heads, built around three 3W LEDs behind a TIR (total internal reflection) lens for a 9W LED array in a compact 117mm housing. It signals vehicle presence on traffic control, civil, utility and fleet vehicles, plant and machinery, and is supplied as a single fixed output per unit: white, red or blue.\u003c\/p\u003e\n\n\u003cp\u003eThe E3 surface mounts through two screw fixing points, one in each end flange, 104mm between centres. Drill two holes in the mounting surface and fix with two screws. It suits grille surrounds, bull bars, guards, tray and body rails, headboards and rear body panels. Confirm mounting hardware and wiring with your auto electrician for your specific vehicle and application.\u003c\/p\u003e\n\n\u003cp\u003eOutput runs across 19 selectable flash patterns at a flash rate of 1 to 4Hz, and the head holds the last pattern selected when power is removed, so a fitted vehicle comes back on in the same setting. Up to 19 heads synchronise together, enough for a full front, side and rear set running as one system. Input is 10 to 30V DC, covering 12V and 24V vehicles and plant with the one part, at a maximum draw of 7W, the lowest in the range.\u003c\/p\u003e\n\n\u003cp\u003eWiring runs on four 20 AWG cores: red for +12 to 24V DC power through a 3A fuse, black for chassis ground, white to set the head into flash group one or group two for simultaneous or alternating operation, and yellow for pattern selection and synchronisation. Wiring should be carried out by a qualified auto electrician.\u003c\/p\u003e\n\n\u003cp\u003eThe housing is polycarbonate, sealed to IP65 and rated for ambient temperatures from -20 to +65 degrees. LED lifespan is rated at 100,000 hours. Overall size is 117 x 45 x 24mm.\u003c\/p\u003e\n\n\u003cp\u003eSupplied product data lists ECE R65 XB1 00 0025 and ECE R10 03 12468. Vehicle lighting requirements vary by vehicle type, registration category and jurisdiction, so confirm the requirements that apply to your vehicle and use.\u003c\/p\u003e\n\n\u003cp\u003eThe E3 is the smallest and lowest draw head in this range. The \u003ca href=\"\/products\/e4-12w-led-warning-light-head\"\u003e\u003cstrong\u003eE4 12W LED warning light head\u003c\/strong\u003e\u003c\/a\u003e is the four-LED version of the same wedge housing, longer at 146mm, and the \u003ca href=\"\/products\/h4-12w-led-warning-light-head\"\u003e\u003cstrong\u003eH4 12W LED warning light head\u003c\/strong\u003e\u003c\/a\u003e is a four-LED TIR head in a 120mm oval housing. For wide angle reflex output instead of forward-directed TIR, see the \u003ca href=\"\/products\/c4-12w-led-warning-light-head\"\u003e\u003cstrong\u003eC4\u003c\/strong\u003e\u003c\/a\u003e and the 27W \u003ca href=\"\/products\/c9-27w-led-warning-light-head\"\u003e\u003cstrong\u003eC9\u003c\/strong\u003e\u003c\/a\u003e. The \u003ca href=\"\/products\/x6-18w-led-warning-light-head-with-tir-lens\"\u003e\u003cstrong\u003eX6 18W LED warning light head\u003c\/strong\u003e\u003c\/a\u003e gives six LEDs and a 180 degree viewing angle from a compact 90mm housing, and is the head UAGS continues to stock in depth across amber, white, red and blue. For amber warning output on traffic control and civil vehicles, see the UAGS-branded \u003ca href=\"\/products\/u30-6a-w-ultra-slim-led-warning-light\"\u003e\u003cstrong\u003eU30-6\u003c\/strong\u003e\u003c\/a\u003e, \u003ca href=\"\/products\/u30-12a-ultra-slim-12w-amber-led-warning-light\"\u003e\u003cstrong\u003eU30-12A\u003c\/strong\u003e\u003c\/a\u003e and \u003ca href=\"\/products\/180deg-dimmable-amber-warning-light-head-6w-led\"\u003e\u003cstrong\u003eU31\u003c\/strong\u003e\u003c\/a\u003e light heads.\u003c\/p\u003e","brand":"911 Signal","offers":[{"title":"WHITE","offer_id":42197186609236,"sku":"020201W","price":64.0,"currency_code":"AUD","in_stock":true},{"title":"RED","offer_id":42197186642004,"sku":"020201R","price":64.0,"currency_code":"AUD","in_stock":true},{"title":"BLUE","offer_id":42197186674772,"sku":"020201B","price":64.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0641\/7389\/9860\/files\/e3-9w-led_warning_lighthead-main-01.webp?v=1785075308"},{"product_id":"e4-12w-led-warning-light-head","title":"E4 12W LED Warning Light Head | TIR Lens","description":"\u003cp\u003eThe \u003cstrong\u003eE4\u003c\/strong\u003e is a surface mount LED warning light head built around four 3W LEDs behind a TIR (total internal reflection) lens, giving a 12W LED array in a slim wedge housing. It signals vehicle presence on traffic control, civil, utility and fleet vehicles, plant and machinery, and is supplied as a single fixed output per unit: white, red, blue, or blue and red, selected at purchase.\u003c\/p\u003e\n\n\u003cp\u003eAt 146mm long the E4 is the larger of the two 12W four-LED heads UAGS stocks, with each LED sitting behind its own optical cell across the lens face. It surface mounts through two screw fixing points, one in each end flange, 133mm between centres, and a surface mount bracket is included. It suits grille surrounds, bull bars, guards, tray and body rails, headboards and rear body panels. Confirm mounting hardware and wiring with your auto electrician for your specific vehicle and application.\u003c\/p\u003e\n\n\u003cp\u003eOutput runs across 19 selectable flash patterns, and the head holds the last pattern selected when power is removed, so a fitted vehicle comes back on in the same setting. Up to 19 heads synchronise together, enough for a full front, side and rear set on one vehicle running as a single system. Input is 10 to 30V DC, covering 12V and 24V vehicles and plant with the one part, at a maximum draw of 9W.\u003c\/p\u003e\n\n\u003cp\u003eWiring runs on four cores: red for +12 to 24V DC power through a 3A fuse, black for chassis ground, white to set the head into flash group one or group two for simultaneous or alternating operation, and yellow for pattern selection and synchronisation. Momentarily applying positive to the yellow wire steps to the next pattern. Wiring should be carried out by a qualified auto electrician.\u003c\/p\u003e\n\n\u003cp\u003eThe housing is polycarbonate, measuring 146 x 45 x 24mm, and LED lifespan is rated at 100,000 hours.\u003c\/p\u003e\n\n\u003cp\u003eSupplied product data lists the SAE-07-W-2 marking together with ECE R65 XA1 00 0026 and ECE R10 03 12468. Vehicle lighting requirements vary by vehicle type, registration category and jurisdiction, so confirm the requirements that apply to your vehicle and use.\u003c\/p\u003e\n\n\u003cp\u003eThe E4 sits alongside the other TIR heads in this range. The \u003ca href=\"\/products\/h4-12w-led-warning-light-head\"\u003e\u003cstrong\u003eH4 12W LED warning light head\u003c\/strong\u003e\u003c\/a\u003e is the same 12W four-LED output in a shorter 120mm oval housing, the \u003ca href=\"\/products\/x6-18w-led-warning-light-head-with-tir-lens\"\u003e\u003cstrong\u003eX6 18W LED warning light head\u003c\/strong\u003e\u003c\/a\u003e is the six-LED 18W head with a 180 degree lens, and the \u003ca href=\"\/products\/f3-9w-mini-led-warning-light-head\"\u003e\u003cstrong\u003eF3 9W mini LED warning light head\u003c\/strong\u003e\u003c\/a\u003e is the smallest head in the range for tight spaces. For a wide angle reflex lens instead of forward-directed TIR optics, see the \u003ca href=\"\/products\/c4-12w-led-warning-light-head\"\u003e\u003cstrong\u003eC4 12W LED warning light head\u003c\/strong\u003e\u003c\/a\u003e, and for a linear lens see the \u003ca href=\"\/products\/hl6-18w-led-warnign-light-head\"\u003e\u003cstrong\u003eHL6 18W white LED warning light head\u003c\/strong\u003e\u003c\/a\u003e. For amber warning output on traffic control and civil vehicles, see the UAGS-branded \u003ca href=\"\/products\/u30-6a-w-ultra-slim-led-warning-light\"\u003e\u003cstrong\u003eU30-6\u003c\/strong\u003e\u003c\/a\u003e, \u003ca href=\"\/products\/u30-12a-ultra-slim-12w-amber-led-warning-light\"\u003e\u003cstrong\u003eU30-12A\u003c\/strong\u003e\u003c\/a\u003e and \u003ca href=\"\/products\/180deg-dimmable-amber-warning-light-head-6w-led\"\u003e\u003cstrong\u003eU31\u003c\/strong\u003e\u003c\/a\u003e light heads.\u003c\/p\u003e","brand":"911 Signal","offers":[{"title":"WHITE","offer_id":42197189623892,"sku":"020202W","price":60.0,"currency_code":"AUD","in_stock":true},{"title":"RED","offer_id":42197189656660,"sku":"020202R","price":60.0,"currency_code":"AUD","in_stock":true},{"title":"BLUE","offer_id":42197189689428,"sku":"020202B","price":60.0,"currency_code":"AUD","in_stock":true},{"title":"BLUE\/RED","offer_id":42197189722196,"sku":"020202BR","price":60.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0641\/7389\/9860\/files\/e4-12w-led_warning_lighthead-main-01.webp?v=1784983805"},{"product_id":"f3-9w-mini-led-warning-light-head","title":"F3 9W Mini Red LED Warning Light Head | TIR Lens","description":"\u003cp\u003eThe \u003cstrong\u003eF3\u003c\/strong\u003e is a compact, ultra-thin LED warning light head running 9W from three 3W CREE LEDs behind a TIR lens. The light head itself measures only 50 x 22mm, which makes it the smallest head UAGS stocks and puts it into grille surrounds, mudguards, rear decks, rear windows and the tight spots on traffic control, civil, utility and fleet vehicles where a full-size head will not fit. Supplied in red output only.\u003c\/p\u003e\u003cp\u003eIt comes with a removable black aluminium housing and can be fitted either way. Stick the light head straight to a surface using the 3M adhesive pad on its back, which is the slimmest option and leaves almost nothing proud of the panel. Or seat the head into the aluminium housing, where the same 3M pad holds it in place, and screw the housing down through the two outer mounting holes. The housing adds real impact protection, which is worth having on a grille, bar work or a truck body where the head takes knocks. With the housing fitted the assembly measures 64 x 33 x 13mm, and the loom passes out through the slot in the centre of the housing's rear face.\u003c\/p\u003e\u003cp\u003eThe four-core loom runs red positive, black ground, yellow for synchronisation and pattern selection, and white to set simultaneous or alternating operation on a paired install. The manufacturer specifies a 2A fuse. Confirm mounting method, fusing and wiring with your auto electrician for your specific vehicle and application.\u003c\/p\u003e\u003cp\u003eThe head runs 13 flash patterns, four of which conform to ECE R65, and accepts 10 to 33V DC, so the one part covers 12V and 24V vehicles and plant. Multiple F3 modules can be synchronised together off the yellow wire. Note that the pattern setting resets if the yellow wire is held against positive for more than three seconds.\u003c\/p\u003e\u003cp\u003eThe head is sealed to IP67, rated for an operating temperature of -20 to +65 degrees C, and the LEDs are rated at 100,000 hours. Maximum draw is 4.5W.\u003c\/p\u003e\u003cp\u003eSupplied product data lists SAE-10-W-2 and ECE R10 for the F3. Vehicle lighting requirements vary by vehicle type, registration category and jurisdiction, so confirm the requirements that apply to your vehicle and use.\u003c\/p\u003e\u003cp\u003eThe F3 is the smallest head in this range. The \u003ca href=\"\/products\/x6-18w-led-warning-light-head-with-tir-lens\"\u003e\u003cstrong\u003eX6 18W LED warning light head\u003c\/strong\u003e\u003c\/a\u003e is the larger six-LED, 18W version with a 180 degree viewing angle, and is the head UAGS continues to stock in depth across amber, white, red, blue and blue\/red. The \u003ca href=\"\/products\/e3-9w-led-warning-light-head\"\u003e\u003cstrong\u003eE3 9W LED warning light head\u003c\/strong\u003e\u003c\/a\u003e gives the same 9W output in a larger 117mm housing, in white, red or blue. For amber warning output, see the UAGS-branded \u003ca href=\"\/products\/u30-6a-w-ultra-slim-led-warning-light\"\u003e\u003cstrong\u003eU30-6\u003c\/strong\u003e\u003c\/a\u003e, \u003ca href=\"\/products\/u30-12a-ultra-slim-12w-amber-led-warning-light\"\u003e\u003cstrong\u003eU30-12A\u003c\/strong\u003e\u003c\/a\u003e and \u003ca href=\"\/products\/180deg-dimmable-amber-warning-light-head-6w-led\"\u003e\u003cstrong\u003eU31\u003c\/strong\u003e\u003c\/a\u003e light heads.\u003c\/p\u003e","brand":"911 Signal","offers":[{"title":"Default Title","offer_id":42197196570708,"sku":"021201R","price":80.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0641\/7389\/9860\/files\/f3-9w-red_led_warning_lighthead-main-01.webp?v=1785140591"},{"product_id":"h4-12w-led-warning-light-head","title":"H4 12W LED Warning Light Head | TIR Lens","description":"\u003cp\u003eThe \u003cstrong\u003eH4\u003c\/strong\u003e is a compact surface mount LED warning light head built around four 3W LEDs behind a TIR (total internal reflection) lens, giving a 12W LED array in a housing 25mm deep. It signals vehicle presence on traffic control, civil, utility and fleet vehicles, plant and machinery, and is supplied as a single fixed output per unit: white, red, or blue and red, selected at purchase.\u003c\/p\u003e\n\n\u003cp\u003eThe H4 surface mounts through two screw fixing points in the mounting ears, 104mm between centres, using 4mm screws. It suits grille surrounds, bull bars, guards, tray and body rails, headboards and rear body panels where a low profile head is needed. A moulded rubber surround sits around the housing to finish the head against the mounting surface. Confirm mounting hardware and wiring with your auto electrician for your specific vehicle and application.\u003c\/p\u003e\n\n\u003cp\u003eOutput runs across 19 selectable flash patterns through the TIR lens, and the head holds the last pattern selected when power is removed, so a fitted vehicle comes back on in the same setting. Input is 10 to 30V DC, covering 12V and 24V vehicles and plant with the one part, at a maximum draw of 9W.\u003c\/p\u003e\n\n\u003cp\u003eWiring runs on four cores: red for +12 to 24V DC power through a 3A fuse, black for chassis ground, white to set the head into flash group one or group two for simultaneous or alternating operation, and yellow for pattern selection and synchronisation. Connecting the yellow wires of several heads together synchronises their flash, and the manufacturer rates the H4 for synchronisation of up to 19 units, so a full set of front, side and rear heads can run as one system. Wiring should be carried out by a qualified auto electrician.\u003c\/p\u003e\n\n\u003cp\u003eThe housing is aluminium and polycarbonate, sealed to IP68 and rated for ambient temperatures from -20 to +65 degrees, suited to exposed mounting positions on vehicles working in vibration, dust and weather. LED lifespan is rated at 100,000 hours.\u003c\/p\u003e\n\n\u003cp\u003eSupplied product data lists ECE R65 XB1 00 0027 and ECE R10 03 12468. Vehicle lighting requirements vary by vehicle type, registration category and jurisdiction, so confirm the requirements that apply to your vehicle and use.\u003c\/p\u003e\n\n\u003cp\u003eThe H4 sits between the two other TIR heads in this range. The \u003ca href=\"\/products\/f3-9w-mini-led-warning-light-head\"\u003e\u003cstrong\u003eF3 9W mini LED warning light head\u003c\/strong\u003e\u003c\/a\u003e is the smaller three-LED version for tight spaces such as grilles and rear windows, and the \u003ca href=\"\/products\/x6-18w-led-warning-light-head-with-tir-lens\"\u003e\u003cstrong\u003eX6 18W LED warning light head\u003c\/strong\u003e\u003c\/a\u003e is the larger six-LED version with a 180 degree viewing angle. For amber warning output on traffic control and civil vehicles, see the UAGS-branded \u003ca href=\"\/products\/u30-6a-w-ultra-slim-led-warning-light\"\u003e\u003cstrong\u003eU30-6\u003c\/strong\u003e\u003c\/a\u003e, \u003ca href=\"\/products\/u30-12a-ultra-slim-12w-amber-led-warning-light\"\u003e\u003cstrong\u003eU30-12A\u003c\/strong\u003e\u003c\/a\u003e and \u003ca href=\"\/products\/180deg-dimmable-amber-warning-light-head-6w-led\"\u003e\u003cstrong\u003eU31\u003c\/strong\u003e\u003c\/a\u003e light heads.\u003c\/p\u003e","brand":"911 Signal","offers":[{"title":"WHITE","offer_id":42197201158228,"sku":"020302W","price":60.0,"currency_code":"AUD","in_stock":true},{"title":"RED","offer_id":42197201190996,"sku":"020302R","price":60.0,"currency_code":"AUD","in_stock":true},{"title":"BLUE\/RED","offer_id":42197201256532,"sku":"020302BR","price":60.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0641\/7389\/9860\/files\/h4-12w-warning_lighthead-main-01.webp?v=1784958587"},{"product_id":"hl6-18w-led-warning-light-head","title":"HL6 18W White LED Warning Light Head | Linear Lens","description":"\u003cp\u003eThe \u003cstrong\u003eHL6\u003c\/strong\u003e is a surface mount LED warning light head built around six 3W LEDs behind a linear (LIN) lens, giving an 18W LED array. The manufacturer rates it as a wide angle warning light, and the linear lens spreads output along the length of the lens window rather than through separate optical cells. It signals vehicle presence on traffic control, civil, utility and fleet vehicles, plant and machinery, and is supplied in white output only.\u003c\/p\u003e\n\n\u003cp\u003eThe HL6 surface mounts through two screw fixing points, one at each end of the housing, 104mm between centres, using 4mm screws. A moulded rubber surround seats the head against the mounting surface. It suits grille surrounds, bull bars, guards, tray and body rails, headboards and rear body panels where a low profile head is needed. Confirm mounting hardware and wiring with your auto electrician for your specific vehicle and application.\u003c\/p\u003e\n\n\u003cp\u003eOutput runs across 19 selectable flash patterns at a flash rate of 1 to 4Hz. Input is 10 to 30V DC, covering 12V and 24V vehicles and plant with the one part, at a maximum draw of 8W.\u003c\/p\u003e\n\n\u003cp\u003eWiring runs on four cores: red for +12 to 24V DC power through a 3A fuse, black for chassis ground, white to set the head into flash group one or group two for simultaneous or alternating operation, and yellow for pattern selection and synchronisation. Connecting the yellow wires of several heads together synchronises their flash, so a set of front, side and rear heads runs as one system. Wiring should be carried out by a qualified auto electrician.\u003c\/p\u003e\n\n\u003cp\u003eThe head is built on an aluminium base, with the internals fully encapsulated for moisture, vibration and corrosion resistance. It is rated for ambient temperatures from -20 to +65 degrees, suited to exposed mounting positions on vehicles working in vibration, dust and weather, and LED lifespan is rated at 100,000 hours.\u003c\/p\u003e\n\n\u003cp\u003eSupplied product data lists ECE R10 03 12468. Vehicle lighting requirements vary by vehicle type, registration category and jurisdiction, so confirm the requirements that apply to your vehicle and use.\u003c\/p\u003e\n\n\u003cp\u003eThe HL6 is the linear lens head in this range, and shares its 120 x 42 x 25mm housing with the \u003ca href=\"\/products\/h4-12w-led-warning-light-head\"\u003e\u003cstrong\u003eH4 12W LED warning light head\u003c\/strong\u003e\u003c\/a\u003e, which carries four LEDs behind a TIR lens instead and is available in white, red, or red and blue. The \u003ca href=\"\/products\/x6-18w-led-warning-light-head-with-tir-lens\"\u003e\u003cstrong\u003eX6 18W LED warning light head\u003c\/strong\u003e\u003c\/a\u003e is the other six-LED 18W head, in a much smaller 90mm housing with a 180 degree TIR lens, and the \u003ca href=\"\/products\/f3-9w-mini-led-warning-light-head\"\u003e\u003cstrong\u003eF3 9W mini LED warning light head\u003c\/strong\u003e\u003c\/a\u003e is the smallest head in the range for tight spaces. For amber warning output on traffic control and civil vehicles, see the UAGS-branded \u003ca href=\"\/products\/u30-6a-w-ultra-slim-led-warning-light\"\u003e\u003cstrong\u003eU30-6\u003c\/strong\u003e\u003c\/a\u003e, \u003ca href=\"\/products\/u30-12a-ultra-slim-12w-amber-led-warning-light\"\u003e\u003cstrong\u003eU30-12A\u003c\/strong\u003e\u003c\/a\u003e and \u003ca href=\"\/products\/180deg-dimmable-amber-warning-light-head-6w-led\"\u003e\u003cstrong\u003eU31\u003c\/strong\u003e\u003c\/a\u003e light heads.\u003c\/p\u003e","brand":"911 Signal","offers":[{"title":"Default Title","offer_id":42197201879124,"sku":"020303W","price":84.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0641\/7389\/9860\/files\/hl6-18w-warning_lighthead-main-01.webp?v=1784970462"},{"product_id":"tc4-12w-dual-colour-led-warning-light-head","title":"TC4 12W Dual Colour LED Warning Light Head | Reflex Lens","description":"\u003cp\u003eThe \u003cstrong\u003eTC4\u003c\/strong\u003e is the two-colour version of the \u003ca href=\"\/products\/c4-12w-led-warning-light-head\"\u003e\u003cstrong\u003eC4\u003c\/strong\u003e\u003c\/a\u003e, built on the same 117mm surface mount housing and the same wide angle reflex lens, but carrying eight 3W LEDs instead of four. The LEDs sit in pairs, one of each colour, in each of the four reflector cells. It signals vehicle presence on traffic control, civil, utility and fleet vehicles, plant and machinery.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThe two colours alternate, they do not run together.\u003c\/strong\u003e One colour lights at a time and the head cycles between them. Because each colour has its own full set of four LEDs spread across all four cells, each one fires across the entire length of the lens rather than half of it. That is the practical difference from a split-colour head, where the LEDs are divided by position and each colour only ever lights its own half. If you need two colours showing at the same moment, the \u003ca href=\"\/products\/c4-12w-led-warning-light-head\"\u003e\u003cstrong\u003eC4\u003c\/strong\u003e\u003c\/a\u003e is sold in blue and red and in red and white as split-output units.\u003c\/p\u003e\u003cp\u003eTwo colour pairs are stocked: amber and red, or blue and white. Each TC4 is a fixed pair chosen at purchase, and the pairing cannot be changed after the fact.\u003c\/p\u003e\u003cp\u003eWhere the TIR heads in this range send output forward through separate optical cells, the reflex lens uses a reflector cup behind each LED to spread light off-axis, so the head stays visible from a much wider angle. It surface mounts through two screw fixing points, one in each end lug, 104mm between centres, suiting bumpers, grille surrounds, bull bars, guards, tray and body rails, headboards and rear body panels. Confirm mounting hardware and wiring with your auto electrician for your specific vehicle and application.\u003c\/p\u003e\u003cp\u003eOutput runs across 29 selectable flash patterns at a flash rate of 1 to 4Hz, ten more than the single-colour C4, which is where the two-colour combinations live. Input is 10 to 30V DC, covering 12V and 24V vehicles and plant with the one part, at a maximum draw of 18W. Wiring runs on four cores: red for power through a 3A fuse, black for chassis ground, white to set the head into flash group one or group two for simultaneous or alternating operation against other heads, and yellow for pattern selection and synchronisation. Connecting the yellow wires of several heads together synchronises their flash. Wiring should be carried out by a qualified auto electrician.\u003c\/p\u003e\u003cp\u003eThe head is built on an aluminium base, sealed to IP68 and rated for ambient temperatures from -20 to +65 degrees, suited to exposed mounting positions on vehicles working in vibration, dust and weather. LED lifespan is rated at 100,000 hours. Overall size is 117 x 30 x 28mm.\u003c\/p\u003e\u003cp\u003eSupplied product data lists ECE R65 XA1 00 0036, ECE R65 XB1 00 0035, ECE R10 04 12754 and SAE J595 Class 1. Vehicle lighting requirements vary by vehicle type, registration category and jurisdiction, so confirm the requirements that apply to your vehicle and use.\u003c\/p\u003e\u003cp\u003eFor single fixed output on the same housing and optics, see the \u003ca href=\"\/products\/c4-12w-led-warning-light-head\"\u003e\u003cstrong\u003eC4 12W LED warning light head\u003c\/strong\u003e\u003c\/a\u003e, which is stocked in six colours. For forward-directed TIR output, the \u003ca href=\"\/products\/h4-12w-led-warning-light-head\"\u003e\u003cstrong\u003eH4\u003c\/strong\u003e\u003c\/a\u003e and the longer \u003ca href=\"\/products\/e4-12w-led-warning-light-head\"\u003e\u003cstrong\u003eE4\u003c\/strong\u003e\u003c\/a\u003e are the same 12W four-LED format, and the \u003ca href=\"\/products\/x6-18w-led-warning-light-head-with-tir-lens\"\u003e\u003cstrong\u003eX6\u003c\/strong\u003e\u003c\/a\u003e steps up to six LEDs. For more output from the same reflex optics, see the 27W \u003ca href=\"\/products\/c9-27w-led-warning-light-head\"\u003e\u003cstrong\u003eC9\u003c\/strong\u003e\u003c\/a\u003e. For amber warning output on traffic control and civil vehicles, see the UAGS-branded \u003ca href=\"\/products\/u30-6a-w-ultra-slim-led-warning-light\"\u003e\u003cstrong\u003eU30-6\u003c\/strong\u003e\u003c\/a\u003e, \u003ca href=\"\/products\/u30-12a-ultra-slim-12w-amber-led-warning-light\"\u003e\u003cstrong\u003eU30-12A\u003c\/strong\u003e\u003c\/a\u003e and \u003ca href=\"\/products\/180deg-dimmable-amber-warning-light-head-6w-led\"\u003e\u003cstrong\u003eU31\u003c\/strong\u003e\u003c\/a\u003e light heads.\u003c\/p\u003e","brand":"911 Signal","offers":[{"title":"AMBER\/RED","offer_id":42197202403412,"sku":"020102AR","price":84.0,"currency_code":"AUD","in_stock":true},{"title":"BLUE\/WHITE","offer_id":42197202436180,"sku":"020102BW","price":84.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0641\/7389\/9860\/files\/tc4-12w-led_warning_lighthead-main-01.webp?v=1785148467"},{"product_id":"x6-18w-led-warning-light-head-with-tir-lens","title":"X6 18W LED Warning Light Head | TIR Lens","description":"\u003cp\u003eThe \u003cstrong\u003eX6\u003c\/strong\u003e is a compact LED warning light head built around a specially designed TIR (total internal reflection) lens, giving a 180 degree viewing angle from a very slim housing. Six 3W CREE LEDs (18W total) sit behind the lens. It suits traffic control, civil, utility and fleet vehicles, plant and machinery, and is supplied as a single fixed colour per unit: amber, white, red or blue, selected at purchase.\u003c\/p\u003e\u003cp\u003eThe X6 surface-mounts through two fixing holes in the base and is commonly fitted to wing mirror housings, guards, bull bars and headboard rails on flat or curved surfaces. It fixes to a metal mounting bracket for standard front mounting; the bracket can be removed to mount from the rear instead, using the rear screw points this exposes, where front access isn't practical. Confirm mounting hardware and wiring with your auto electrician for your specific vehicle and application.\u003c\/p\u003e\u003cp\u003eOutput runs across 19 flash patterns through the TIR lens, and the head accepts 10 to 30V DC, covering 12V and 24V vehicles and plant with the one part.\u003c\/p\u003e\u003cp\u003eWiring runs on four cores: red for +12-24V DC power, black for ground, yellow for synchronisation and pattern selection, and white for simultaneous or alternating flash. Two X6 heads can be wired together through the yellow and white wires to flash in sync or alternate against each other, useful for matched pairs such as left and right mirror mounts. Wiring should be carried out by a qualified auto electrician.\u003c\/p\u003e\u003cp\u003eThe housing is rugged and sealed to IP67 for exposed mounting and washdown conditions, with a breathable membrane behind the lens to help manage internal pressure and moisture.\u003c\/p\u003e\u003cp\u003eSupplied product data lists SAE J845 Class 1 and ECE R65 XA XB1 for the X6. Vehicle lighting requirements vary by vehicle type, registration category and jurisdiction, so confirm the requirements that apply to your vehicle and use.\u003c\/p\u003e\u003cp\u003eThe X6 is a related product to the \u003ca href=\"\/products\/f3-9w-mini-led-warning-light-head\"\u003e\u003cstrong\u003eF3 9W mini LED warning light head\u003c\/strong\u003e\u003c\/a\u003e, also from 911 Signal - the F3 is the smaller 3-LED, 9W version for tighter mounting spaces such as grilles and rear windows, while the X6 is the larger 6-LED, 18W version for a wider viewing angle.\u003c\/p\u003e\u003cp\u003eFor a head that can switch between two colours from the one unit, see the \u003ca href=\"\/products\/3w-led-dual-colour-warning-light-head\"\u003e\u003cstrong\u003eU32-3AW dual colour warning light head\u003c\/strong\u003e\u003c\/a\u003e. For UAGS-branded single colour heads with a wider mounting face, see the \u003ca href=\"\/products\/u30-6a-w-ultra-slim-led-warning-light\"\u003e\u003cstrong\u003eU30-6\u003c\/strong\u003e\u003c\/a\u003e, \u003ca href=\"\/products\/u30-12a-ultra-slim-12w-amber-led-warning-light\"\u003e\u003cstrong\u003eU30-12A\u003c\/strong\u003e\u003c\/a\u003e and \u003ca href=\"\/products\/180deg-dimmable-amber-warning-light-head-6w-led\"\u003e\u003cstrong\u003eU31\u003c\/strong\u003e\u003c\/a\u003e light heads.\u003c\/p\u003e","brand":"911 Signal","offers":[{"title":"AMBER","offer_id":42197202960468,"sku":"X6-6A-S","price":80.0,"currency_code":"AUD","in_stock":true},{"title":"BLUE\/RED","offer_id":47421464084564,"sku":"X6-6RB-S","price":80.0,"currency_code":"AUD","in_stock":true},{"title":"WHITE","offer_id":42197202993236,"sku":"X6-6W-S","price":80.0,"currency_code":"AUD","in_stock":true},{"title":"RED","offer_id":42197203026004,"sku":"X6-6R-S","price":80.0,"currency_code":"AUD","in_stock":true},{"title":"BLUE","offer_id":42197203058772,"sku":"X6-6B-S","price":80.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0641\/7389\/9860\/files\/x6-6-led-warning-light-head-06.webp?v=1784975892"},{"product_id":"metal-angled-bracket-for-beacon","title":"175mm Offset Beacon Mounting Bracket","description":"\u003cp\u003eThis L-shape aluminium bracket extends a warning beacon out from the mounting point, clear of the structure it's fixed to. That makes it the right choice for round or awkward sections you can't mount a beacon flat against, such as roof rack crossbars, rack uprights, arrow board frames and equipment frames, as well as vertical faces like a headboard or vehicle cabin. It suits most standard warning beacons up to 170mm base diameter.\u003c\/p\u003e\u003cp\u003ePowdercoated black, with 8mm mounting holes and a cable entry hole through the base. Overall size 180 x 175 x 28mm, weighs approximately 265g. Sold individually, beacon not included.\u003c\/p\u003e\u003cp\u003eNeed a smaller footprint? The \u003ca href=\"\/products\/beacon-mounting-bracket-offset-side-mount-145mm\"\u003e145mm offset bracket\u003c\/a\u003e uses the same design at a smaller size. For flat mounting surfaces, see the \u003ca href=\"\/products\/metal-plate-bracket-for-warning-beacon\"\u003eflat plate\u003c\/a\u003e or \u003ca href=\"\/products\/metal-disc-bracket-for-warning-beacon\"\u003eround plate\u003c\/a\u003e instead.\u003c\/p\u003e","brand":"UAG Services","offers":[{"title":"Default Title","offer_id":42197233467476,"sku":"BMB-OS-175","price":35.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0641\/7389\/9860\/files\/bmb-os-175-offset_beacon_mounting_bracket_175mm-01.webp?v=1784439548"},{"product_id":"metal-plate-bracket-for-warning-beacon","title":"175mm Flat Beacon Mounting Plate","description":"\u003cp\u003eThis heavy duty 3mm steel plate gives you a flat mounting point for a warning beacon on flat surfaces such as headboards, canopies and equipment frame panels, where a bolt-on plate is easier to fit than a bent bracket. The slotted holes let you shift the beacon along the plate to clear an obstruction or line up with existing fixing points. It suits most standard warning beacons up to 170mm base diameter.\u003c\/p\u003e\u003cp\u003ePowdercoated black, with slotted mounting holes for adjustment, 3 x 5mm fixing holes and a cable entry hole through the plate. Overall size 220 x 170 x 3mm, weighs approximately 0.8kg. Sold individually, beacon not included.\u003c\/p\u003e\u003cp\u003ePart of the UAGS beacon mounting bracket range, alongside the \u003ca href=\"\/products\/metal-angled-bracket-for-beacon\"\u003e175mm offset bracket\u003c\/a\u003e, \u003ca href=\"\/products\/beacon-mounting-bracket-offset-side-mount-145mm\"\u003e145mm offset bracket\u003c\/a\u003e and \u003ca href=\"\/products\/metal-disc-bracket-for-warning-beacon\"\u003e170mm round plate\u003c\/a\u003e. If you need to clear a roof rack crossbar, rack upright or other round section, the offset bracket is usually the better fit.\u003c\/p\u003e","brand":"UAG Services","offers":[{"title":"Default Title","offer_id":42197233500244,"sku":"BMB-FP-175","price":27.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0641\/7389\/9860\/files\/bmb-fp-beacon_mounting_bracket_flat_plate-01.webp?v=1784441038"},{"product_id":"metal-disc-bracket-for-warning-beacon","title":"170mm Round Beacon Mounting Plate","description":"\u003cp\u003eThis flat disc bracket sits a warning beacon centrally on a flat mounting surface such as a roof, bonnet or headboard, raising it just enough to run the cable through the base. It suits most standard warning beacons up to 170mm base diameter.\u003c\/p\u003e\u003cp\u003eZinc plated steel, with slotted mounting holes for adjustment, 2 x 5mm fixing holes and a cable entry hole through the disc. Overall size 170mm diameter x 3mm thick, weighs approximately 510g. Sold individually, beacon not included.\u003c\/p\u003e\u003cp\u003ePart of the UAGS beacon mounting bracket range, alongside the \u003ca href=\"\/products\/metal-plate-bracket-for-warning-beacon\"\u003eflat plate\u003c\/a\u003e and the \u003ca href=\"\/products\/metal-angled-bracket-for-beacon\"\u003e175mm\u003c\/a\u003e and \u003ca href=\"\/products\/beacon-mounting-bracket-offset-side-mount-145mm\"\u003e145mm offset brackets\u003c\/a\u003e. If you need to clear a round rail or crossbar rather than mount flush, the offset bracket is the better fit.\u003c\/p\u003e","brand":"UAG Services","offers":[{"title":"Default Title","offer_id":42197233533012,"sku":"BMB-RP-170","price":30.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0641\/7389\/9860\/files\/bmb-rp-beacon_mounting_bracket_round-01.webp?v=1784441441"},{"product_id":"24w-amber-compact-led-warning-beacon-magnetic-fixed","title":"24W Mini Amber LED Warning Beacon | Magnetic or Fixed","description":"\u003cp\u003eThe \u003cstrong\u003e911 Signal FD24 Mini 24W amber LED warning beacon\u003c\/strong\u003e provides 360-degree amber hazard warning from a very low-profile housing that mounts magnetically or bolts down permanently. At 110mm diameter and 47.5mm high it suits utes, trucks, plant machinery, pilot vehicles and OSOM vehicles, and the dual mounting makes it practical both as a fixed fit-out item and as a transferable beacon moved between vehicles.\u003c\/p\u003e\n\u003cp\u003eFor temporary use, the magnetic base holds to a clean, flat steel surface with no drilling or permanent wiring. For permanent installation, the beacon bolts down using the supplied foam gasket. UAGS also stocks \u003ca href=\"\/products\/metal-angled-bracket-for-beacon\"\u003e\u003cstrong\u003eangled\u003c\/strong\u003e\u003c\/a\u003e, \u003ca href=\"\/products\/metal-disc-bracket-for-warning-beacon\"\u003e\u003cstrong\u003edisc\u003c\/strong\u003e\u003c\/a\u003e and \u003ca href=\"\/products\/metal-plate-bracket-for-warning-beacon\"\u003e\u003cstrong\u003eplate\u003c\/strong\u003e\u003c\/a\u003e beacon mounting brackets suiting beacons up to 170mm diameter.\u003c\/p\u003e\n\u003cp\u003ePower runs through a 3m three-core cable fitted with a cigarette lighter plug that carries the on\/off and flash pattern selection switch, so the beacon is controlled from inside the cab without permanent wiring.\u003c\/p\u003e\n\u003cp\u003eLight output comes from 24 x 1 watt LEDs behind a reflex PMMA lens with 92 percent light transmittance, producing 360-degree amber coverage. Eight selectable flash patterns run at 1-4Hz, including rotating and strobe modes. The LEDs are rated for a 100,000 hour lifespan.\u003c\/p\u003e\n\u003cp\u003eOperation is 10-33V DC, suiting both 12V and 24V vehicle electrical systems. The aluminium alloy housing and top hat carry an IP68 ingress protection rating with an operating temperature range of -30°C to +70°C, suiting exposed positions subject to dust, water and weather.\u003c\/p\u003e\n\u003cp\u003eThe supplied product data lists \u003cstrong\u003eSAE J845 Class 1\u003c\/strong\u003e and \u003cstrong\u003eECE R65\u003c\/strong\u003e (approvals TA1 00 0064 and TB1 00 0065). These certifications relate to light output performance as per the supplied product data.\u003c\/p\u003e\n\u003cp\u003eFor a fixed direct-wired beacon with a replaceable lens, see the \u003ca href=\"\/products\/u7-24-48w-amber-led-flashing-beacon\"\u003e\u003cstrong\u003eU7-24 48W Amber LED Flashing Beacon\u003c\/strong\u003e\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eCommonly fitted to traffic control vehicles, civil fleet vehicles, utility vehicles, pilot vehicles and plant equipment. Vehicle lighting requirements may vary by vehicle type, registration category, jurisdiction and intended use. Vehicle warning systems support visibility but do not replace a traffic management plan or traffic guidance scheme.\u003c\/p\u003e","brand":"911 Signal","offers":[{"title":"Default Title","offer_id":42197235171412,"sku":"FD24MINI","price":140.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0641\/7389\/9860\/files\/fd24-mini_amber_beacon_magnetic-main.webp?v=1783837078"},{"product_id":"24w-amber-compact-square-led-warning-beacon","title":"24W Amber LED Square Warning Beacon","description":"\u003cp\u003eThe \u003cstrong\u003eUAGS U3-24 24W amber LED square warning beacon\u003c\/strong\u003e provides 360-degree amber hazard warning from a compact, low-profile square housing. At 100mm x 100mm x 45mm it suits space-limited mounting positions on utes, trucks, plant machinery, pilot vehicles and OSOM transport where a full-size dome beacon will not fit.\u003c\/p\u003e\n\u003cp\u003eThe beacon surface-mounts with a two-point bolt-down base, fixing flat to vehicle roofs, cab guards, tray bodies and plant surfaces. The low 45mm profile keeps it clear of branches, height limits and equipment.\u003c\/p\u003e\n\u003cp\u003eLight output comes from 24 x 1 watt LEDs behind an amber polycarbonate lens, producing 360-degree amber coverage. Nine selectable modes include ECE R65 compliant rotator, single, double and quad flashes at 120 FPM and SAE compliant equivalents at 75 FPM, per the supplied product data. Pattern selection runs through the pattern wire, brightness can be reduced for night work through the dimming wire, and multiple units synchronise through the sync wire.\u003c\/p\u003e\n\u003cp\u003eMultivolt 10-30V DC operation suits both 12V and 24V vehicle electrical systems, with a maximum current draw of 2.0A at 12V DC in flashing mode.\u003c\/p\u003e\n\u003cp\u003eThe aluminium base and polycarbonate lens carry an IP67 ingress protection rating with an operating temperature range of -30°C to +50°C, suiting exposed mounting positions subject to dust, water and vibration. The unit weighs approximately 0.4kg.\u003c\/p\u003e\n\u003cp\u003eThe supplied product data lists \u003cstrong\u003eECE R65 Class 1\u003c\/strong\u003e and \u003cstrong\u003eSAE J845 Class 1\u003c\/strong\u003e. These certifications relate to light output performance as per the supplied product data.\u003c\/p\u003e\n\u003cp\u003eFor a round compact beacon, see the \u003ca href=\"\/products\/u4-12-12w-amber-led-warning-beacon\"\u003e\u003cstrong\u003eU4-12 12W Amber LED Warning Beacon\u003c\/strong\u003e\u003c\/a\u003e; for higher output, see the \u003ca href=\"\/products\/u4-24-24w-amber-led-warning-beacon\"\u003e\u003cstrong\u003eU4-24 24W Amber LED Warning Beacon\u003c\/strong\u003e\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eCommonly fitted to traffic control vehicles, civil fleet vehicles, utility vehicles and plant equipment. Vehicle lighting requirements may vary by vehicle type, registration category, jurisdiction and intended use. Vehicle warning systems support visibility but do not replace a traffic management plan or traffic guidance scheme.\u003c\/p\u003e","brand":"UAG Services","offers":[{"title":"Default Title","offer_id":42197235794004,"sku":"U3-24-AA","price":140.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0641\/7389\/9860\/files\/U3-24-AA_ebe7bd7d-5dfc-4c57-b1dc-b975ddd0aa2b.jpg?v=1751363340"},{"product_id":"u30-6a-w-ultra-slim-led-warning-light","title":"6W Ultra-Slim LED Warning Light Head | Amber or White","description":"\u003cp\u003e\u003cstrong\u003eU30 Ultra-Slim 6W LED Warning Light Head\u003c\/strong\u003e signals vehicle presence and hazard warning on work vehicles, available in amber or white output. Six 1W LEDs behind a TIR lens deliver directional warning from a housing just 7.5mm deep, which is what earns the Ultra-Slim name: it mounts where a standard light head will not fit.\u003c\/p\u003e\n\n\u003cp\u003eThe head surface mounts to grilles, headboards, tray sides, rear bodies and light bar frames, two ways: screw fix through the mounting points, or stick the included 3M adhesive mounting pad to a clean flat surface. The pad makes for a quicker install with no holes drilled in steel bodywork, and the slim profile suits recessed and tight positions such as bull bar channels and body lines. Wiring is a four-wire hard-wired connection: power through a 2A fuse, ground, a pattern-select wire and a dimming wire, best terminated by an auto electrician during the fit-out.\u003c\/p\u003e\n\n\u003cp\u003eIn operation the head runs 50 flash patterns covering ECE and SAE single, double and quad flash at 75, 120 and 150 FPM, plus modulated and steady burn modes, stepped through from the pattern-select wire. Output dims for night work from the dimming wire, and up to six U30 heads synchronise so a vehicle's corner and perimeter lights flash in unison.\u003c\/p\u003e\n\n\u003cp\u003eThe sealed IP67 housing handles dust, water, washdowns and vibration across a -20 to +65 degree operating range, suited to exposed mounting positions on vehicles that work outdoors every day.\u003c\/p\u003e\n\n\u003cp\u003eThe light is certified to ECE R65 Class 1 with ECE R10 EMC approval and SAE Class 1 performance, running on any 10 to 30V DC system so one part covers 12V utes and 24V trucks.\u003c\/p\u003e\n\n\u003cp\u003eChoose this 6W head for corner, perimeter and grille positions, and step up to the longer \u003ca href=\"\/products\/u30-12a-ultra-slim-12w-amber-led-warning-light\"\u003e\u003cstrong\u003eU30 12W amber head\u003c\/strong\u003e\u003c\/a\u003e where more output is wanted from the same slim profile. The wider UAGS surface mount range includes the \u003ca href=\"\/products\/180deg-dimmable-amber-warning-light-head-6w-led\"\u003e\u003cstrong\u003eU31 180-degree 6W head\u003c\/strong\u003e\u003c\/a\u003e and \u003ca href=\"\/products\/3w-led-dual-colour-warning-light-head\"\u003e\u003cstrong\u003eU32 dual colour head\u003c\/strong\u003e\u003c\/a\u003e. In the field these heads run on traffic control utes, TMA support vehicles, civil and utility fleets and plant working around live traffic.\u003c\/p\u003e","brand":"UAG Services","offers":[{"title":"WHITE","offer_id":42197383381076,"sku":"U30-6W","price":66.0,"currency_code":"AUD","in_stock":true},{"title":"AMBER","offer_id":42197383413844,"sku":"U30-6A","price":66.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0641\/7389\/9860\/files\/u30-6-led-warning-light-head-01.webp?v=1784388639"},{"product_id":"u30-12a-ultra-slim-12w-amber-led-warning-light","title":"12W Ultra-Slim Amber LED Warning Light Head | Surface Mount","description":"\u003cp\u003e\u003cstrong\u003eU30 Ultra-Slim 12W Amber LED Warning Light Head\u003c\/strong\u003e signals vehicle presence and hazard warning on work vehicles. Twelve 1W LEDs behind a TIR lens deliver directional amber warning from a housing just 7.5mm deep, the strongest output in the U30 Ultra-Slim family, mounting where a standard light head will not fit.\u003c\/p\u003e\n\n\u003cp\u003eThe head surface mounts to grilles, headboards, tray sides, rear bodies and light bar frames, two ways: screw fix through the mounting points, or stick the included 3M adhesive mounting pad to a clean flat surface. The pad makes for a quicker install with no holes drilled in steel bodywork, and the slim profile suits recessed and tight positions such as bull bar channels and body lines. For interior glass mounting, the \u003ca href=\"\/products\/universal-interior-window-mount-warning-light-heads\"\u003e\u003cstrong\u003eWM-155-30 Adjustable Warning Light Window Mount\u003c\/strong\u003e\u003c\/a\u003e carries this head on the inside of front, side or rear windows. Wiring is a four-wire hard-wired connection: power through a 2A fuse, ground, a pattern-select wire and a dimming wire, best terminated by an auto electrician during the fit-out.\u003c\/p\u003e\n\n\u003cp\u003eIn operation the head runs 19 flash patterns covering single, double and quad flash at 75 and 120 FPM plus steady burn, stepped through from the pattern-select wire. Output dims for night work from the dimming wire, and up to six U30 heads synchronise so a vehicle's corner and perimeter lights flash in unison.\u003c\/p\u003e\n\n\u003cp\u003eThe sealed IP67 housing handles dust, water, washdowns and vibration across a -20 to +65 degree operating range, suited to exposed mounting positions on vehicles that work outdoors every day.\u003c\/p\u003e\n\n\u003cp\u003eThe light is certified to ECE R65 Class 1 with ECE R10 EMC approval, running on any 10 to 30V DC system so one part covers 12V utes and 24V trucks.\u003c\/p\u003e\n\n\u003cp\u003eChoose this 12W head where maximum output is wanted from the slim profile, and use the shorter \u003ca href=\"\/products\/u30-6a-w-ultra-slim-12w-led-warning-light\"\u003e\u003cstrong\u003eU30 6W head in amber or white\u003c\/strong\u003e\u003c\/a\u003e for corner and grille positions. The wider UAGS surface mount range includes the \u003ca href=\"\/products\/180deg-dimmable-amber-warning-light-head-6w-led\"\u003e\u003cstrong\u003eU31 180-degree 6W head\u003c\/strong\u003e\u003c\/a\u003e and \u003ca href=\"\/products\/3w-led-dual-colour-warning-light-head\"\u003e\u003cstrong\u003eU32 dual colour head\u003c\/strong\u003e\u003c\/a\u003e. In the field these heads run on traffic control utes, TMA support vehicles, civil and utility fleets and plant working around live traffic.\u003c\/p\u003e","brand":"UAG Services","offers":[{"title":"Default Title","offer_id":42197383446612,"sku":"U30-12A","price":70.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0641\/7389\/9860\/files\/u30-12-led-warning-light-head-01.webp?v=1784443503"},{"product_id":"blue-forewarning-safety-arrow-led-light","title":"Blue Forewarning Safety Arrow LED Light","description":"\u003ch1\u003eBLUE FOREWARNING ARROW\u003c\/h1\u003e\n\n\u003cp\u003eSKU: U40-B\u003c\/p\u003e\n\n\u003cp\u003eForewarning Arrow promotes workplace safety by preventing dangerous collisions. Alerts pedestrians, ground workers and other vehicles of vehicle\/plant approaching particular with blind corners and cross aisle traffic. Easily mounted to plant, it projects a bright LED arrow on the floor’s surface – alerting people and other vehicles in the area, regardless of ambient noise, to the nearby presence of the vehicle. As the vehicle travels, a bright arrow light in blue shines across the floor about 3m ahead of or behind it (depending on the mounting location), letting people know that a vehicle is approaching. Can be used on any plant or machinery, like forklifts, Elevated Work Platforms, Profiles, Trucks, etc...\u003c\/p\u003e\n\n\u003ch2\u003e\u003cspan style=\"color:#FF0000;\"\u003eFeatures\u003c\/span\u003e\u003c\/h2\u003e\n\n\u003cul\u003e\n\t\u003cli\u003e12-60V DC\u003c\/li\u003e\n\t\u003cli\u003eEasy to install and maintenance free\u003c\/li\u003e\n\t\u003cli\u003eSize: 100mm (width) 37mm (Height) 94mm (Depth)\u003c\/li\u003e\n\t\u003cli\u003eBlue Arrow projection\u003c\/li\u003e\n\t\u003cli\u003eIP 67 Rating\u003c\/li\u003e\n\t\u003cli\u003ePolycarbonate Lens\u003c\/li\u003e\n\t\u003cli\u003eAluminium Housing\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003e\u003cspan style=\"color:#FF0000;\"\u003eSpecifications\u003c\/span\u003e\u003c\/h2\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eOP. VOLTAGE: 12-60VDC\u003c\/li\u003e\n\t\u003cli\u003eMOUNTING: Stainless steel Bracket\u003c\/li\u003e\n\t\u003cli\u003eWIDTH: 100mm (without bracket)\u003c\/li\u003e\n\t\u003cli\u003eHEIGHT: 37mm (without bracket)\u003c\/li\u003e\n\t\u003cli\u003eDEPTH: 94mm (without bracket)\u003c\/li\u003e\n\t\u003cli\u003eCURRENT DRAW: 0.5-0.7A @12.8VDC\u003c\/li\u003e\n\t\u003cli\u003eIP RATING: 67\u003c\/li\u003e\n\t\u003cli\u003eMATERIAL: Aluminium\u003c\/li\u003e\n\t\u003cli\u003eLENS: Polycarbonate\u003c\/li\u003e\n\t\u003cli\u003eWEIGHT: 430GRM\u003c\/li\u003e\n\t\u003cli\u003eLED: 3W LED x 3\u003c\/li\u003e\n\t\u003cli\u003eLED COLOUR: Blue\u003c\/li\u003e\n\t\u003cli\u003eWIRE: Red\/Black\u003c\/li\u003e\n\t\u003cli\u003eOP. TEMP: -20 to 70 Deg. C\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n","brand":"UAG Services","offers":[{"title":"Default Title","offer_id":42197385281620,"sku":"U40-3BA","price":140.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0641\/7389\/9860\/files\/U40-3BA_c6b0c105-7cce-4d94-b3c1-29c1cb5e9fd7.jpg?v=1751365726"},{"product_id":"744mm-72w-amber-led-warning-lightbar","title":"744mm 72W Amber LED Warning Lightbar","description":"\u003cp\u003eThe \u003cstrong\u003eLED Autolamps LB744ACM amber warning lightbar\u003c\/strong\u003e provides 360-degree amber hazard warning from the vehicle roof during roadside work, traffic control operations and mobile works activities. At 744mm long it is a full-size roof bar suited to utes, trucks and fleet vehicles working in traffic control, civil, utility and council environments.\u003c\/p\u003e\n\u003cp\u003eThe bar is supplied with a four-point mounting bracket kit, using M8 bolts and coach bolts with mounting pads, washers and nuts, for fixed installation direct to the vehicle roof. The bracket is optional: the bar can also be mounted directly to roof bars, which is how UAGS generally fits it during vehicle fit-outs. A 50cm three-core cable connects the bar to the vehicle electrical system, and the low 45mm profile keeps installed height down on vehicles that work under height limits or carry other roof equipment.\u003c\/p\u003e\n\u003cp\u003eLight output comes from 72 x 1 watt LEDs with TIR optics behind a clear polycarbonate lens, producing amber output rated at 5750 lumen raw and 4320 lumen effective as supplied. Output is 360-degree omnidirectional, and 19 selectable flash patterns allow the bar to be configured to suit different operating conditions and vehicle setups. Two or more bars can be synchronised on patterns 1 to 12 via the pattern-select wire, keeping flash output matched across bars on the same vehicle.\u003c\/p\u003e\n\u003cp\u003eMultivolt 10-30V DC operation supports installation on both 12V and 24V vehicle electrical systems. Current draw is 4.5A at 13.8V DC and 2.3A at 28V DC.\u003c\/p\u003e\n\u003cp\u003eThe ABS base and aluminium thermal management carry an IP65 ingress protection rating with an operating temperature range of -40°C to +60°C, suiting exposed roof positions subject to dust, weather and vibration.\u003c\/p\u003e\n\u003cp\u003eThe supplied product data lists \u003cstrong\u003eECE R65\u003c\/strong\u003e and \u003cstrong\u003eECE R10\u003c\/strong\u003e approval and \u003cstrong\u003eSAE J845 Class 1\u003c\/strong\u003e compliance, with flash patterns 1 and 4 identified as the ECE R65 and SAE J845 Class 1 compliant patterns. These certifications relate to light output performance and electromagnetic compatibility as per the supplied product data.\u003c\/p\u003e\n\u003cp\u003eThe LB744ACM sits in the middle of the LED Autolamps amber lightbar range. For a longer bar with higher output, see the \u003ca href=\"\/products\/964mm-90w-amber-led-warning-lightbar\"\u003e\u003cstrong\u003e964mm 90W Amber LED Warning Lightbar\u003c\/strong\u003e\u003c\/a\u003e; for smaller vehicles or temporary use, see the \u003ca href=\"\/products\/380mm-42w-amber-led-magnetic-warning-minibar\"\u003e\u003cstrong\u003e380mm Amber LED Magnetic Warning Minibar\u003c\/strong\u003e\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eCommonly used on traffic control vehicles, civil fleet vehicles, utility vehicles and maintenance vehicles. Vehicle lighting requirements may vary by vehicle type, registration category, jurisdiction and intended use. Vehicle warning systems support visibility but do not replace a traffic management plan or traffic guidance scheme.\u003c\/p\u003e","brand":"LED AUTOLAMPS","offers":[{"title":"Default Title","offer_id":42197432270932,"sku":"LB744ACM","price":720.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0641\/7389\/9860\/files\/LB744ACM_51222623-ae89-4d90-9fa9-2a54aa5bdd30.jpg?v=1751366588"},{"product_id":"964mm-90w-amber-led-warning-lightbar","title":"964mm 90W Amber LED Warning Lightbar","description":"\u003cp\u003eThe \u003cstrong\u003eLED Autolamps LB964ACM amber warning lightbar\u003c\/strong\u003e provides 360-degree amber hazard warning from the vehicle roof during roadside work, traffic control operations and mobile works activities. At 964mm long it is the largest bar in the UAGS LED Autolamps lightbar range, suited to trucks, utes and fleet vehicles working in traffic control, civil, utility and council environments.\u003c\/p\u003e\n\u003cp\u003eThe bar is supplied with a four-point mounting bracket kit, using M8 bolts and coach bolts with mounting pads, washers and nuts, for fixed installation direct to the vehicle roof. The bracket is optional: the bar can also be mounted directly to roof bars, which is how UAGS generally fits it during vehicle fit-outs. A 50cm three-core cable connects the bar to the vehicle electrical system, and the low 45mm profile keeps installed height down on vehicles that work under height limits or carry other roof equipment. An in-cab switch is not included and is arranged as part of the installation.\u003c\/p\u003e\n\u003cp\u003eLight output comes from 90 x 1 watt LEDs with TIR optics behind a clear polycarbonate lens, producing amber output rated at 7200 lumen raw and 5400 lumen effective as supplied. Output is 360-degree omnidirectional, and 19 selectable flash patterns allow the bar to be configured to suit different operating conditions and vehicle setups. Two or more bars can be synchronised on patterns 1 to 12 via the pattern-select wire, keeping flash output matched across bars on the same vehicle.\u003c\/p\u003e\n\u003cp\u003eMultivolt 10-30V DC operation supports installation on both 12V and 24V vehicle electrical systems. Current draw is 5.8A at 13.8V DC and 2.9A at 28V DC.\u003c\/p\u003e\n\u003cp\u003eThe ABS base and aluminium thermal management carry an IP65 ingress protection rating with an operating temperature range of -40°C to +60°C, suiting exposed roof positions subject to dust, weather and vibration.\u003c\/p\u003e\n\u003cp\u003eThe supplied product data lists \u003cstrong\u003eECE R65\u003c\/strong\u003e and \u003cstrong\u003eECE R10\u003c\/strong\u003e approval and \u003cstrong\u003eSAE J845 Class 1\u003c\/strong\u003e compliance, with flash patterns 1 and 4 identified as the ECE R65 and SAE J845 Class 1 compliant patterns. These certifications relate to light output performance and electromagnetic compatibility as per the supplied product data.\u003c\/p\u003e\n\u003cp\u003eThe LB964ACM is the longest bar in the range. For a mid-size roof bar, see the \u003ca href=\"\/products\/744mm-72w-amber-led-warning-lightbar\"\u003e\u003cstrong\u003e744mm 72W Amber LED Warning Lightbar\u003c\/strong\u003e\u003c\/a\u003e; for smaller vehicles or temporary use, see the \u003ca href=\"\/products\/380mm-42w-amber-led-magnetic-warning-minibar\"\u003e\u003cstrong\u003e380mm Amber LED Magnetic Warning Minibar\u003c\/strong\u003e\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eCommonly used on traffic control vehicles, civil fleet vehicles, utility vehicles and maintenance vehicles. Vehicle lighting requirements may vary by vehicle type, registration category, jurisdiction and intended use. Vehicle warning systems support visibility but do not replace a traffic management plan or traffic guidance scheme.\u003c\/p\u003e","brand":"LED Autolamps","offers":[{"title":"Default Title","offer_id":42197434040404,"sku":"LB964ACM","price":942.04,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0641\/7389\/9860\/files\/LB964ACM_ff804db3-b3b1-459e-a174-2c04b7c8bc67.jpg?v=1751366645"},{"product_id":"246mm-30w-amber-led-magnetic-warning-minibar","title":"246mm 30W Amber LED Magnetic Warning Minibar","description":"\u003cp\u003eThe \u003cstrong\u003eLED Autolamps LB246AMM magnetic amber warning minibar\u003c\/strong\u003e provides 360-degree amber hazard warning from the vehicle roof without permanent installation. At 246mm it is the compact option in the LED Autolamps magnetic range, suited to utes, service vans, escort and support vehicles, and any fleet where warning lighting moves between vehicles or is fitted for a single job.\u003c\/p\u003e\n\u003cp\u003eThe bar mounts with a magnetic suction cup base on a clean, flat section of roof, positioned parallel to the ground. The supplier rates the magnetic mount for temporary use at speeds not exceeding 100km\/h, and states magnetic warning lamps are not designed for permanent use on moving vehicles - use on a moving vehicle is at the operator's discretion. For permanent installation, LED Autolamps offers a four-point adjustable mounting feet kit (part 246BKT) as an accessory, and the same bar is available as a single-bolt fixed-mount version (LB246ACM, clear lens), which UAGS also stocks.\u003c\/p\u003e\n\u003cp\u003ePower and control run through a 3m cable with a power plug, with the on\/off and flash pattern selection switch built into the plug. There is no permanent wiring: plug in, place the bar and it is operating.\u003c\/p\u003e\n\u003cp\u003eLight output comes from 30 x 1 watt LEDs behind an amber polycarbonate lens, producing 360-degree omnidirectional amber output. There are 18 selectable flash patterns, from rotating and single\/double\/quad flash modes through to hyper-flash and steady burn. The supplied product data identifies pattern 9 (Quad, all LEDs) as the SAE J845 Class 1 compliant pattern and patterns 12 to 15 (the 2Hz modes) as the ECE R65 patterns.\u003c\/p\u003e\n\u003cp\u003eMultivolt 10-30V DC operation suits both 12V and 24V vehicle electrical systems. Current draw is 1.63A at 13.8V DC and 0.56A at 28V DC.\u003c\/p\u003e\n\u003cp\u003eThe ABS base and polycarbonate lens carry an IP67 ingress protection rating with an operating temperature range of -40°C to +60°C, suiting exposed roof positions subject to dust and weather.\u003c\/p\u003e\n\u003cp\u003eThe supplied product data lists \u003cstrong\u003eECE R65\u003c\/strong\u003e and \u003cstrong\u003eECE R10\u003c\/strong\u003e approval and \u003cstrong\u003eSAE J845 Class 1\u003c\/strong\u003e compliance. These certifications relate to light output performance and electromagnetic compatibility as per the supplied product data.\u003c\/p\u003e\n\u003cp\u003eFor a larger magnetic bar with higher output, see the \u003ca href=\"\/products\/380mm-42w-amber-led-magnetic-warning-minibar\"\u003e\u003cstrong\u003e380mm Amber LED Magnetic Warning Minibar\u003c\/strong\u003e\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eCommonly used on traffic control support vehicles, civil fleet vehicles, utility vehicles and hire or pool vehicles. Vehicle lighting requirements may vary by vehicle type, registration category, jurisdiction and intended use. Vehicle warning systems support visibility but do not replace a traffic management plan or traffic guidance scheme.\u003c\/p\u003e","brand":"LED AUTOLAMPS","offers":[{"title":"Default Title","offer_id":42197434990676,"sku":"LB246AMM","price":238.5,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0641\/7389\/9860\/files\/LB246ACM.jpg?v=1751366764"},{"product_id":"380mm-42w-amber-led-magnetic-warning-minibar","title":"380mm 42W Amber LED Magnetic Warning Minibar","description":"\u003cp\u003eThe \u003cstrong\u003eLED Autolamps LB380ACMM magnetic amber warning minibar\u003c\/strong\u003e provides 360-degree amber hazard warning from the vehicle roof without permanent installation. It suits utes, support vehicles, pool and hire vehicles, and any fleet where warning lighting needs to move between vehicles or be fitted for a single job.\u003c\/p\u003e\n\u003cp\u003eThe bar mounts with a magnetic suction cup base on a clean, flat section of roof, positioned parallel to the ground. The supplier rates the magnetic mount for temporary use at speeds not exceeding 100km\/h, and states magnetic warning lamps are not designed for permanent use on moving vehicles - use on a moving vehicle is at the operator's discretion. For a permanent installation, LED Autolamps offers a four-point adjustable mounting feet kit (part 246BKT) as an accessory, or consider a fixed-mount bar such as the \u003ca href=\"\/products\/744mm-72w-amber-led-warning-lightbar\"\u003e\u003cstrong\u003e744mm 72W Amber LED Warning Lightbar\u003c\/strong\u003e\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003ePower and control run through a 3m cable with a power plug, with the on\/off and flash pattern selection switch built into the plug. There is no permanent wiring: plug in, place the bar and it is operating, which is what makes this model practical for vehicle-to-vehicle transfer.\u003c\/p\u003e\n\u003cp\u003eLight output comes from 42 x 1 watt LEDs behind a clear polycarbonate lens, producing 360-degree omnidirectional amber output. There are 18 selectable flash patterns, from rotating and single\/double\/quad flash modes through to hyper-flash and steady burn. The supplied product data identifies pattern 9 (Quad, all LEDs) as the SAE J845 Class 1 compliant pattern and patterns 12 to 15 (the 2Hz modes) as the ECE R65 patterns.\u003c\/p\u003e\n\u003cp\u003eMultivolt 10-30V DC operation suits both 12V and 24V vehicle electrical systems. Current draw is 2.51A at 13.8V DC.\u003c\/p\u003e\n\u003cp\u003eThe ABS base and polycarbonate lens carry an IP67 ingress protection rating with an operating temperature range of -40°C to +60°C, suiting exposed roof positions subject to dust and weather.\u003c\/p\u003e\n\u003cp\u003eThe supplied product data lists \u003cstrong\u003eECE R65\u003c\/strong\u003e and \u003cstrong\u003eECE R10\u003c\/strong\u003e approval and \u003cstrong\u003eSAE J845 Class 1\u003c\/strong\u003e compliance. These certifications relate to light output performance and electromagnetic compatibility as per the supplied product data.\u003c\/p\u003e\n\u003cp\u003eThe LB380ACMM is the mid-size magnetic option in the LED Autolamps range. For a smaller magnetic bar, see the \u003ca href=\"\/products\/246mm-30w-amber-led-magnetic-warning-minibar\"\u003e\u003cstrong\u003e246mm Amber LED Magnetic Warning Minibar\u003c\/strong\u003e\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eCommonly used on traffic control support vehicles, civil fleet vehicles, utility vehicles and hire or pool vehicles. Vehicle lighting requirements may vary by vehicle type, registration category, jurisdiction and intended use. Vehicle warning systems support visibility but do not replace a traffic management plan or traffic guidance scheme.\u003c\/p\u003e","brand":"LED AUTOLAMPS","offers":[{"title":"Default Title","offer_id":42197435220052,"sku":"LB380ACMM","price":396.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0641\/7389\/9860\/files\/LB380ACM_cc8d85b1-d689-4e89-9cec-14a9218609ac.jpg?v=1751366795"},{"product_id":"u4-24-24w-amber-led-warning-beacon","title":"24W Amber LED Warning Beacon | Fixed Mount","description":"\u003cp\u003eThe \u003cstrong\u003eUAGS U4-24 24W amber LED warning beacon\u003c\/strong\u003e provides 360-degree amber hazard warning from a fixed mounting position on work vehicles and plant equipment. It is the higher-output beacon in the U4 series, suited to traffic control vehicles, trucks, forklifts, excavators and heavy machinery working in roadworks, construction and site environments.\u003c\/p\u003e\n\u003cp\u003eThe beacon installs on an aluminium three-point base with the mounting gasket included, fixing to vehicle roofs, cab guards, tray brackets and plant bodywork. UAGS also stocks \u003ca href=\"\/products\/metal-angled-bracket-for-beacon\"\u003e\u003cstrong\u003eangled\u003c\/strong\u003e\u003c\/a\u003e, \u003ca href=\"\/products\/metal-disc-bracket-for-warning-beacon\"\u003e\u003cstrong\u003edisc\u003c\/strong\u003e\u003c\/a\u003e and \u003ca href=\"\/products\/metal-plate-bracket-for-warning-beacon\"\u003e\u003cstrong\u003eplate\u003c\/strong\u003e\u003c\/a\u003e beacon mounting brackets suiting beacons up to 170mm diameter.\u003c\/p\u003e\n\u003cp\u003eLight output comes from 24 x 1 watt LEDs behind an amber polycarbonate lens, producing 360-degree amber coverage. There are 18 selectable modes: ECE compliant single, double, quad and rotate flashes at 120 FPM, SAE compliant equivalents at 75 FPM (each in two phase settings), plus steady on and off, per the supplied product data. Pattern selection runs through the pattern wire, brightness can be reduced for night work through the dimming function, and multiple units synchronise through the sync wire.\u003c\/p\u003e\n\u003cp\u003eMultivolt 10-30V DC operation suits both 12V and 24V vehicle electrical systems, with a maximum current draw of 2.6A at 13.8V DC.\u003c\/p\u003e\n\u003cp\u003eThe aluminium base and polycarbonate lens carry an IP65 ingress protection rating, suiting exposed mounting positions subject to dust, water and vibration. The unit weighs 0.6kg.\u003c\/p\u003e\n\u003cp\u003eThe supplied product data lists \u003cstrong\u003eECE R65\u003c\/strong\u003e and \u003cstrong\u003eSAE Class 2\u003c\/strong\u003e. These certifications relate to light output performance as per the supplied product data.\u003c\/p\u003e\n\u003cp\u003eFor a lower-profile beacon in the same series, see the \u003ca href=\"\/products\/u4-12-12w-amber-led-warning-beacon\"\u003e\u003cstrong\u003eU4-12 12W Amber LED Warning Beacon\u003c\/strong\u003e\u003c\/a\u003e; for the highest output in the range, see the \u003ca href=\"\/products\/u7-24-48w-amber-led-flashing-beacon\"\u003e\u003cstrong\u003eU7-24 48W Amber LED Flashing Beacon\u003c\/strong\u003e\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eCommonly fitted to traffic control vehicles, civil fleet vehicles, utility vehicles and plant equipment. Vehicle lighting requirements may vary by vehicle type, registration category, jurisdiction and intended use. Vehicle warning systems support visibility but do not replace a traffic management plan or traffic guidance scheme.\u003c\/p\u003e","brand":"UAG Services","offers":[{"title":"Default Title","offer_id":42197435809876,"sku":"U4-24-AAT","price":190.0,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0641\/7389\/9860\/files\/u4-24-24w-amber-led-warning-beacon-main.webp?v=1783838238"},{"product_id":"u4-12-12w-amber-led-warning-beacon","title":"12W Amber LED Warning Beacon | Low Profile","description":"\u003cp\u003eThe \u003cstrong\u003eUAGS U4-12 12W amber LED warning beacon\u003c\/strong\u003e provides 360-degree amber hazard warning from a low-profile fixed mounting position. At 148mm diameter and just 64mm high, it suits utes, trucks, forklifts and plant machinery where installed height matters, while sharing its base and functions with the higher-output U4-24.\u003c\/p\u003e\n\u003cp\u003eThe beacon installs on an aluminium three-point base with the mounting gasket included, fixing to vehicle roofs, cab guards, tray brackets and plant bodywork. UAGS also stocks \u003ca href=\"\/products\/metal-angled-bracket-for-beacon\"\u003e\u003cstrong\u003eangled\u003c\/strong\u003e\u003c\/a\u003e, \u003ca href=\"\/products\/metal-disc-bracket-for-warning-beacon\"\u003e\u003cstrong\u003edisc\u003c\/strong\u003e\u003c\/a\u003e and \u003ca href=\"\/products\/metal-plate-bracket-for-warning-beacon\"\u003e\u003cstrong\u003eplate\u003c\/strong\u003e\u003c\/a\u003e beacon mounting brackets suiting beacons up to 170mm diameter.\u003c\/p\u003e\n\u003cp\u003eLight output comes from 12 x 1 watt LEDs behind an amber polycarbonate lens, producing 360-degree amber coverage. There are 18 selectable modes: ECE compliant single, double, quad and rotate flashes at 120 FPM, SAE compliant equivalents at 75 FPM (each in two phase settings), plus steady on and off, per the supplied product data. Pattern selection runs through the pattern wire, brightness can be reduced for night work through the dimming function, and multiple units synchronise through the sync wire.\u003c\/p\u003e\n\u003cp\u003eMultivolt 10-30V DC operation suits both 12V and 24V vehicle electrical systems, with a maximum current draw of 1.3A at 13.8V DC.\u003c\/p\u003e\n\u003cp\u003eThe aluminium base and polycarbonate lens carry an IP65 ingress protection rating, suiting exposed mounting positions subject to dust, water and vibration. The unit weighs 0.5kg.\u003c\/p\u003e\n\u003cp\u003eThe supplied product data lists \u003cstrong\u003eECE R65\u003c\/strong\u003e and \u003cstrong\u003eSAE Class 2\u003c\/strong\u003e. These certifications relate to light output performance as per the supplied product data.\u003c\/p\u003e\n\u003cp\u003eFor higher output in the same series, see the \u003ca href=\"\/products\/u4-24-24w-amber-led-warning-beacon\"\u003e\u003cstrong\u003eU4-24 24W Amber LED Warning Beacon\u003c\/strong\u003e\u003c\/a\u003e; for a compact square housing, see the \u003ca href=\"\/products\/24w-amber-compact-square-led-warning-beacon\"\u003e\u003cstrong\u003eU3-24 24W Amber LED Square Warning Beacon\u003c\/strong\u003e\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eCommonly fitted to traffic control vehicles, civil fleet vehicles, utility vehicles and plant equipment. Vehicle lighting requirements may vary by vehicle type, registration category, jurisdiction and intended use. Vehicle warning systems support visibility but do not replace a traffic management plan or traffic guidance scheme.\u003c\/p\u003e","brand":"UAG Services","offers":[{"title":"Default Title","offer_id":42197435875412,"sku":"U4-12-AAT","price":140.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0641\/7389\/9860\/files\/u4-12-12w-amber-led-warning-beacon-main.webp?v=1783838128"},{"product_id":"180deg-dimmable-amber-warning-light-head-6w-led","title":"6W Amber LED Warning Light Head | Surface Mount","description":"\u003cp\u003eThe \u003cstrong\u003eUAGS U31-6A 6W amber LED warning light head\u003c\/strong\u003e delivers wide angle amber warning output across a 180-degree spread, supporting vehicle warning setups where side visibility is required. It is used on traffic control utes, service vehicles, civil plant and fleet vehicles to define vehicle presence when operating roadside, in work zones or on active worksites.\u003c\/p\u003e\n\u003cp\u003eThe light head surface-mounts with an aluminium bezel on a 95mm x 37mm face, fixing through two 4.1mm mounting holes at 84mm centres. The wide angle lens is deliberately raised, projecting 26mm from the mounting surface, which is what lets it throw light across the full 180 degrees rather than only straight out. It is commonly mounted along vehicle sides and rear corners to extend warning coverage beyond forward-facing beacons and lightbars.\u003c\/p\u003e\n\u003cp\u003eLight output comes from 6 x 1 watt LEDs behind the wide angle lens. There are 14 selectable modes: ECE R65 single and double flashes at 120 FPM and quad flashes at 150 FPM, each in two phase settings, plus single, double and quad flashes at 75 FPM, steady burn and off. Pattern selection runs through the pattern wire, brightness can be reduced for night work through the dimming wire, and up to six heads synchronise through the sync wires, with phase 1 and phase 2 settings allowing alternating flash sequences across the vehicle.\u003c\/p\u003e\n\u003cp\u003eMultivolt 10-30V DC operation suits both 12V and 24V vehicle electrical systems, with a maximum draw of 0.83A at 12.8V DC.\u003c\/p\u003e\n\u003cp\u003eThe sealed housing and aluminium body carry an IP67 ingress protection rating, suiting exposed mounting positions subject to rain, dust, washdown and vibration.\u003c\/p\u003e\n\u003cp\u003eThe U31-6A is certified to \u003cstrong\u003eECE R65 Class 1\u003c\/strong\u003e, \u003cstrong\u003eSAE Class 1\u003c\/strong\u003e and \u003cstrong\u003eECE R10\u003c\/strong\u003e as supplied. These certifications relate to light output performance and electromagnetic compatibility.\u003c\/p\u003e\n\u003cp\u003eIn real-world deployment, the U31-6A works as part of a multi-point warning setup, positioned on vehicle sides, rear sections or plant extremities so the vehicle remains clearly identifiable when entering, exiting or operating within traffic-controlled environments. For 360-degree coverage from a single unit, see the \u003ca href=\"\/products\/u4-12-12w-amber-led-warning-beacon\"\u003e\u003cstrong\u003eU4-12 12W Amber LED Warning Beacon\u003c\/strong\u003e\u003c\/a\u003e or the \u003ca href=\"\/products\/24w-amber-compact-square-led-warning-beacon\"\u003e\u003cstrong\u003eU3-24 24W Amber LED Square Warning Beacon\u003c\/strong\u003e\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eVehicle lighting requirements may vary by vehicle type, registration category, jurisdiction and intended use. Vehicle warning systems support visibility but do not replace a traffic management plan or traffic guidance scheme.\u003c\/p\u003e","brand":"UAG Services","offers":[{"title":"Default Title","offer_id":42197437218900,"sku":"U31-6A","price":80.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0641\/7389\/9860\/files\/U31-6A_bcd227ab-a4d6-429e-89cf-3e4058f6e01e.jpg?v=1751367130"},{"product_id":"b-class-led-arrow-board-double-sided-vehicle-mounted","title":"B Class LED Arrow Board Double Sided","description":"\u003cp\u003eThe \u003cstrong\u003eB Class LED Arrow Board Double Sided\u003c\/strong\u003e is a double-sided vehicle-mounted B Class LED traffic control arrow board used where directional guidance or hazard warning display is required from both the rear and front of a traffic control vehicle. It is suited to traffic control vehicles, convoy vehicles, mobile works vehicles, civil fleet vehicles, utility vehicles, contractor vehicles and temporary traffic management vehicle fitouts where traffic may approach or view the vehicle from more than one direction.\u003c\/p\u003e\n\n\u003cp\u003eThe double-sided board is based on the same UAGS B Class arrow board platform as the single-sided model. The single-sided platform has been tested by a NATA-accredited laboratory as part of the NSW RTA \/ RMS FAS\/5 approval process. This double-sided version uses the same core manufacture platform and components, with the addition of 15 LED clusters, an additional controller cable and a second internal controller card for the forward-facing display.\u003c\/p\u003e\n\n\u003cp\u003eThe double-sided configuration should be confirmed against the supplied product documentation, current standards, project requirements, applicable traffic management documentation and road authority conditions. Product selection, installation and use do not make a vehicle, worksite, traffic management plan, traffic guidance scheme or traffic setup compliant on their own.\u003c\/p\u003e\n\n\u003cp\u003eThe arrow board may be fitted to a suitable cabin rack, traffic control cage, tray headboard, tray-mounted frame, rear tray structure or other compatible vehicle mounting structure. Final mounting must be confirmed against the vehicle setup, mounting structure, project requirements and applicable traffic management documentation. Installation must be completed by a qualified auto electrician.\u003c\/p\u003e\n\n\u003cp\u003eThe double-sided board has a 1500mm x 770mm display area, a 1545mm x 770mm mounting footprint and 30 LED clusters total, with 15 LED clusters per side. Display modes include Arrow Left, Arrow Right, Double Arrow and Hazard, with Hazard mode used as the non-directional warning \/ flashing corner mode. The flash rate is 35–45 cycles per minute and luminous intensity is greater than 700 cd.\u003c\/p\u003e\n\n\u003cp\u003eThe system includes two in-cabin touch controllers with illuminated buttons and swivel mounting brackets, one for rear display control and one for forward display control. Controller buttons include On\/Off, Work Light, Beacon, Raise, Lower, Arrow Left, Arrow Right, Double Arrow and Hazard. The controllers use illuminated button feedback, with green for standby \/ ready and red for active functions. The electric actuator allows the board to be raised and lowered from inside the cabin.\u003c\/p\u003e\n\n\u003cp\u003eBoth internal controller cards are housed within the same board body, with service access from the rear-facing side of the board. Because the double-sided model is based on the same UAGS B Class arrow board manufacture platform as the single-sided model, many core service parts are shared or interchangeable to support fleet servicing, spare parts management and long-term maintenance for customers running mixed arrow board fleets.\u003c\/p\u003e\n\n\u003cp\u003eThe arrow board is supplied standard with a 12V DC actuator, with a 24V DC actuator available on request for suitable 24V vehicle systems. Confirm the required vehicle voltage before ordering. The integrated light sensor supports automatic dimming for day and night operation. The system includes short-circuit protection, solid-state circuitry, low-voltage monitoring, reverse polarity protection, over-voltage protection and fail-safe behaviour that defaults to Hazard mode during communication loss or low-voltage fault.\u003c\/p\u003e\n\n\u003cp\u003eThe enclosure is IP54 rated and uses a weather-resistant vented design to assist with internal air movement and condensation management. The product is assembled in Australia using locally manufactured structural components with imported electrical systems and actuator hardware, supporting practical servicing and integration into UAGS traffic control vehicle fitouts.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eBulky freight item.\u003c\/strong\u003e Checkout shows live carrier rates, which can be high for regional and remote deliveries. Before ordering for a remote area or in bulk, contact us for a freight quote and we will arrange the most economical option.\u003c\/p\u003e","brand":"UAG Services","offers":[{"title":"Default Title","offer_id":42197437382740,"sku":"AB-BCLASS-1500-30-D","price":4990.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0641\/7389\/9860\/files\/BCLASSABDBL_d138d113-d486-4974-9e60-780631634869.jpg?v=1751367171"},{"product_id":"3w-led-dual-colour-warning-light-head","title":"3W Ultra-Slim Dual Colour LED Warning Light Head | Amber\/White","description":"\u003cp\u003e\u003cstrong\u003eU32-3AW Ultra-Slim Dual Colour LED Warning Light Head\u003c\/strong\u003e signals vehicle presence and hazard warning from a single ultra-slim head that carries both amber and white output in the one housing. Six 1W LEDs, three amber and three white, sit behind a polycarbonate lens in a 73 x 28 x 9mm black aluminium body, giving crews colour flexibility from a single mounting point.\u003c\/p\u003e\n\n\u003cp\u003eThe head fixes with a 3M adhesive pad or two screws through 6mm mounting holes at 62.6mm centres, suiting surface mounting to grilles, headboards, tray sides, rear bodies and light bar frames. Wiring is a hard-wired connection: a positive wire for amber and a separate positive wire for white (each through a recommended 2A fuse), a shared negative, a pattern-select wire, a sync wire and a dimming wire, best terminated by an auto electrician during the fit-out.\u003c\/p\u003e\n\n\u003cp\u003eIn operation the head runs 15 flash patterns covering ECE R65 and SAE single, double and quad flash at 75 and 120 FPM in two phase settings, plus a fast\/slow flash and steady burn, stepped through from the pattern-select wire. Output dims for night work from the dimming wire, and multiple U32 heads synchronise together or in alternating phase through the sync wire.\u003c\/p\u003e\n\n\u003cp\u003eThe sealed IP67 aluminium housing handles dust, water, washdowns and vibration across a -30 to +70 degree operating range, suited to exposed mounting positions on vehicles that work outdoors every day.\u003c\/p\u003e\n\n\u003cp\u003eThe light meets SAE J595 Class 1 performance criteria with ECE R10 EMC approval, running on any 10 to 30V DC system so one part covers 12V utes and 24V trucks.\u003c\/p\u003e\n\n\u003cp\u003eThe dual colour output suits corner and perimeter positions where a single head needs to cover both amber warning and white output from one mounting point. The wider UAGS surface mount range includes the \u003ca href=\"\/products\/u30-6a-w-ultra-slim-led-warning-light\"\u003e\u003cstrong\u003eU30 6W head in amber or white\u003c\/strong\u003e\u003c\/a\u003e, the \u003ca href=\"\/products\/u30-12a-ultra-slim-12w-amber-led-warning-light\"\u003e\u003cstrong\u003eU30 12W amber head\u003c\/strong\u003e\u003c\/a\u003e and the \u003ca href=\"\/products\/180deg-dimmable-amber-warning-light-head-6w-led\"\u003e\u003cstrong\u003eU31 180-degree 6W head\u003c\/strong\u003e\u003c\/a\u003e. In the field these heads run on traffic control utes, TMA support vehicles, civil and utility fleets and plant working around live traffic.\u003c\/p\u003e","brand":"UAG Services","offers":[{"title":"Default Title","offer_id":42197447802964,"sku":"U32-3AW","price":40.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0641\/7389\/9860\/files\/u32-3aw-amber_white_3w_warning_lighthead-main-01.webp?v=1785135097"},{"product_id":"u7-24-48w-amber-led-flashing-beacon","title":"48W Amber LED Flashing Beacon","description":"\u003cp\u003eThe \u003cstrong\u003eUAGS U7-24 48W LED flashing beacon\u003c\/strong\u003e is a direct-wired vehicle warning beacon that supports vehicle visibility across traffic control, civil construction, utility, council maintenance and plant operations. It is available in two lens options, an amber high dome lens (U7-24AAT) or a clear high dome lens (U7-24CAT), both producing amber LED output. It is commonly installed on work vehicles operating around roadworks, construction zones, mobile works, worksite access areas and other environments where vehicle warning visibility is required.\u003c\/p\u003e\n\u003cp\u003eThe U7-24 replaces the discontinued \u003cstrong\u003eUAGS U1-24 72W beacon\u003c\/strong\u003e in the UAGS range. Fleets replacing or standardising older U1-24 units should select this model.\u003c\/p\u003e\n\u003cp\u003eThe beacon uses a two-part mounting system consisting of a permanently mounted fixed base ring and a removable beacon body. The base ring is secured using a three-point fixing pattern, while the beacon attaches with a twist-lock connection for secure installation and simplified servicing. It suits installation on vehicle roofs, ute canopies, service bodies, tray-mounted brackets and plant bodywork where the mounting surface and installation method are appropriate. UAGS also stocks \u003ca href=\"\/products\/metal-angled-bracket-for-beacon\"\u003e\u003cstrong\u003eangled\u003c\/strong\u003e\u003c\/a\u003e, \u003ca href=\"\/products\/metal-disc-bracket-for-warning-beacon\"\u003e\u003cstrong\u003edisc\u003c\/strong\u003e\u003c\/a\u003e and \u003ca href=\"\/products\/metal-plate-bracket-for-warning-beacon\"\u003e\u003cstrong\u003eplate\u003c\/strong\u003e\u003c\/a\u003e beacon mounting brackets suiting beacons up to 170mm diameter.\u003c\/p\u003e\n\u003cp\u003eLight output comes from 24 high-power LEDs operating from a \u003cstrong\u003e10-48V DC\u003c\/strong\u003e supply with multiple selectable flash patterns, including \u003cstrong\u003eR65\u003c\/strong\u003e flash modes, \u003cstrong\u003eCA\/SAE-style\u003c\/strong\u003e flash patterns, rotating modes and steady burn. Pattern selection, dimming and steady-on functions are available through the direct-wired function wires, depending on the vehicle wiring and control setup. The beacon has built-in memory and resumes the last selected flash pattern when powered back on.\u003c\/p\u003e\n\u003cp\u003eThis model is supplied as a \u003cstrong\u003edirect-wired beacon\u003c\/strong\u003e. Wiring functions include positive supply, negative, pattern selection, dimming and steady-on operation. This UAGS variant does \u003cstrong\u003enot\u003c\/strong\u003e include a cigarette plug and is not intended for plug-in or portable operation.\u003c\/p\u003e\n\u003cp\u003eThe beacon incorporates a replaceable high dome polycarbonate lens, amber or clear depending on the selected variant, with an aluminium base and an IP69K ingress protection rating to support installation in exposed operating environments.\u003c\/p\u003e\n\u003cp\u003eSupplier product data lists \u003cstrong\u003eECE R65 Class 2\u003c\/strong\u003e and \u003cstrong\u003eECE R10\u003c\/strong\u003e. The beacon is commonly fitted to traffic control vehicles, civil fleet vehicles, utility service vehicles, council maintenance vehicles, TMA support vehicles, service bodies and plant equipment. Vehicle lighting requirements may vary by vehicle type, registration category, jurisdiction and intended use.\u003c\/p\u003e","brand":"UAG Services","offers":[{"title":"AMBER","offer_id":47328289128532,"sku":"U7-24AAT","price":229.0,"currency_code":"AUD","in_stock":false},{"title":"CLEAR","offer_id":47324456091732,"sku":"U7-24CAT","price":229.0,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0641\/7389\/9860\/files\/U7-24AAT-amber-lens-amber-led-warning-beacon-main-01.webp?v=1783321178"},{"product_id":"246mm-30w-amber-led-fixed-mount-warning-minibar","title":"246mm 30W Amber LED Fixed Mount Warning Minibar","description":"\u003cp\u003eThe \u003cstrong\u003eLED Autolamps LB246ACM amber warning minibar\u003c\/strong\u003e provides 360-degree amber hazard warning from the vehicle roof as a permanent fixed-mount installation. At 246mm it is the compact fixed-mount option in the LED Autolamps range, suited to utes, service vans and fleet vehicles that carry their warning lighting full time.\u003c\/p\u003e\n\u003cp\u003eThe bar installs on a single-bolt mount with a painted steel bracket, fixed to the vehicle roof or a flat mounting surface. A 45cm cable connects the bar to the vehicle electrical system for hardwired installation through a cab switch.\u003c\/p\u003e\n\u003cp\u003eFlash patterns are selected through the pattern wire: a short contact steps to the next pattern and a longer contact steps back. Multiple bars can be synchronised by setting the same pattern and joining the pattern wires, keeping flash output matched across two or more bars on the same vehicle.\u003c\/p\u003e\n\u003cp\u003eLight output comes from 30 x 1 watt LEDs behind a clear polycarbonate lens, producing 360-degree omnidirectional amber output. There are 18 selectable flash patterns, from rotating and single\/double\/quad flash modes through to hyper-flash and steady burn. The supplied product data identifies pattern 9 (Quad, all LEDs) as the SAE J845 Class 1 compliant pattern and patterns 12 to 15 (the 2Hz modes) as the ECE R65 patterns.\u003c\/p\u003e\n\u003cp\u003eMultivolt 10-30V DC operation suits both 12V and 24V vehicle electrical systems. Current draw is 1.63A at 13.8V DC and 0.56A at 28V DC.\u003c\/p\u003e\n\u003cp\u003eThe ABS base and polycarbonate lens carry an IP67 ingress protection rating with an operating temperature range of -40°C to +60°C, suiting exposed roof positions subject to dust, weather and vibration.\u003c\/p\u003e\n\u003cp\u003eThe supplied product data lists \u003cstrong\u003eECE R65\u003c\/strong\u003e and \u003cstrong\u003eECE R10\u003c\/strong\u003e approval and \u003cstrong\u003eSAE J845 Class 1\u003c\/strong\u003e compliance. These certifications relate to light output performance and electromagnetic compatibility as per the supplied product data.\u003c\/p\u003e\n\u003cp\u003eFor temporary or vehicle-to-vehicle use, UAGS also stocks the magnetic version of this bar with an amber lens: the \u003ca href=\"\/products\/246mm-30w-amber-led-magnetic-warning-minibar\"\u003e\u003cstrong\u003e246mm Amber LED Magnetic Warning Minibar\u003c\/strong\u003e\u003c\/a\u003e. For a longer fixed bar, see the \u003ca href=\"\/products\/744mm-72w-amber-led-warning-lightbar\"\u003e\u003cstrong\u003e744mm 72W Amber LED Warning Lightbar\u003c\/strong\u003e\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eCommonly used on traffic control vehicles, civil fleet vehicles, utility vehicles and maintenance vehicles. Vehicle lighting requirements may vary by vehicle type, registration category, jurisdiction and intended use. Vehicle warning systems support visibility but do not replace a traffic management plan or traffic guidance scheme.\u003c\/p\u003e","brand":"LED AUTOLAMPS","offers":[{"title":"Default Title","offer_id":47327867600980,"sku":"LB246ACM","price":238.5,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0641\/7389\/9860\/files\/lb246acm-246mm-amber-led-roofbar-main.webp?v=1783404653"},{"product_id":"7-light-sequential-rechargeable-led-warning-kit","title":"7-Light Sequential Rechargeable LED Warning Light Kit","description":"\u003cp\u003eThe \u003cstrong\u003e7-Light Sequential Rechargeable LED Warning Light Kit\u003c\/strong\u003e is a portable warning and illuminated delineation system used across traffic management, civil construction, transport, trucking, utilities, mining, infrastructure and roadside operations. Each rechargeable light provides 360-degree visible LED output and offers five sequential and flashing operating modes.\u003c\/p\u003e\n\n\u003cp\u003eEach light has a low-profile, ring-shaped housing with an open centre. For cone mounting, the light slides over the top of a compatible traffic cone and sits around the upper section of the cone. Multiple lights can be positioned along a line of cones to reinforce a taper, lane shift, merge, temporary traffic path or work zone boundary as part of a suitable traffic management setup.\u003c\/p\u003e\n\n\u003cp\u003eThe open-centre mounting design allows each light to be installed directly over a compatible cone without clips, brackets or magnetic attachment to the cone. Cone compatibility depends on the dimensions and shape of the cone, so fitment should be checked before the lights are deployed.\u003c\/p\u003e\n\n\u003cp\u003eEach light also has three magnets fitted to its underside, providing a separate mounting option for suitable ferrous metal surfaces. This allows the lights to be temporarily attached to compatible steel vehicle panels, machinery, barriers and worksite equipment where the surface material, shape and condition provide secure magnetic contact. The magnets will not attach to plastic traffic cones or non-ferrous surfaces such as aluminium or fibreglass.\u003c\/p\u003e\n\n\u003cp\u003eThe five available operating modes support sequential guidance and general flashing warning applications. When the lights are arranged in order, the sequential modes can provide progressive visual guidance along the deployed path. The flashing modes can be used for general hazard marking, roadside work, temporary vehicle stops, loading areas and other operations requiring an additional illuminated warning device.\u003c\/p\u003e\n\n\u003cp\u003eEach orange light contains 30 × 2835 SMD LEDs, an internal 3.7V 2200mAh rechargeable lithium battery and integrated fluorescent yellow-green reflective sections. Approximate operating time ranges from 8 to 50 hours depending on the selected mode, with an approximate charging time of 6 to 7 hours. Battery condition, charging history and operating conditions may affect actual runtime.\u003c\/p\u003e\n\n\u003cp\u003eThe impact-resistant PC and TPR housing carries an IPX7 water resistance rating, making the lights suitable for outdoor operating conditions where exposure to rain and wet environments may occur. IPX7 relates to water resistance and does not indicate a dust protection rating.\u003c\/p\u003e\n\n\u003cp\u003eThe seven lights are supplied in a dedicated carry and charging case with an individual storage and charging position for each light. A mains power charger and vehicle car charger are included, allowing the kit to be recharged from a suitable mains power outlet or compatible vehicle power socket. This provides flexibility for charging at a depot, workshop, office or from a suitable vehicle between deployments.\u003c\/p\u003e\n\n\u003cp\u003eThe organised case keeps the seven lights and charging equipment together during storage and transport. It also supports faster deployment and pack-down by providing a dedicated position for each light and the included charging equipment.\u003c\/p\u003e\n\n\u003cp\u003eThe \u003cstrong\u003eCL7-01\u003c\/strong\u003e kit is suitable for traffic management crews, truck operators, civil contractors, utilities, fleet operators and roadside service teams requiring a portable lighting system that can be deployed on compatible cones or suitable steel surfaces.\u003c\/p\u003e\n\n\u003cp\u003eThis product is a supplementary warning and illuminated delineation system. It does not replace required traffic signs, traffic control devices, vehicle warning systems or an approved Traffic Management Plan. Product selection, placement and use should be confirmed against the applicable traffic management plan, project requirements, site conditions and relevant road authority requirements.\u003c\/p\u003e","brand":"UAG Services","offers":[{"title":"Default Title","offer_id":47344613490772,"sku":"CL7-01","price":369.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0641\/7389\/9860\/files\/cl7-01-led-warning-light-front-active.webp?v=1783681197"},{"product_id":"beacon-mounting-bracket-offset-side-mount-145mm","title":"145mm Offset Beacon Mounting Bracket","description":"\u003cp\u003e\u003cstrong\u003e145mm Offset Beacon Mounting Bracket (BMB-OS-145)\u003c\/strong\u003e is a folded aluminium bracket that holds a warning beacon out from a vertical face, clear of the structure behind it. It is the smaller version of the 175mm offset bracket and does the same job where the mounting point, or the beacon itself, is too tight for the larger plate.\u003c\/p\u003e\u003cp\u003eThe plate measures 145mm wide by 150mm long, with a 30mm flange folded down the rear edge. Four 8mm holes through the flange bolt the bracket to the mounting point, with hole centres 20mm and 40mm in from each side and centred 15mm up the flange. That suits headboards, roof rack crossbars, canopies, rack uprights, arrow board frames and equipment frames. Fasteners are not supplied and should be chosen to suit the mounting surface.\u003c\/p\u003e\u003cp\u003eThe beacon fixes to the top face. Five 6mm holes give two mounting patterns, at 60mm and 70mm from the centre of the plate, so the bracket takes two beacon base sizes without drilling. A 12mm hole through the centre passes the beacon cable down and out of the way.\u003c\/p\u003e\u003cp\u003eMade from 3mm aluminium, powdercoated black, and weighs approximately 185g. Sold individually. The beacon, cable and fasteners are supplied separately.\u003c\/p\u003e\u003cp\u003eNeed a larger plate? The \u003ca href=\"\/products\/metal-angled-bracket-for-beacon\"\u003e\u003cstrong\u003e175mm Offset Beacon Mounting Bracket\u003c\/strong\u003e\u003c\/a\u003e uses the same design at a bigger size. For a flat mounting surface, see the \u003ca href=\"\/products\/metal-plate-bracket-for-warning-beacon\"\u003e\u003cstrong\u003e175mm Flat Beacon Mounting Plate\u003c\/strong\u003e\u003c\/a\u003e or the \u003ca href=\"\/products\/metal-disc-bracket-for-warning-beacon\"\u003e\u003cstrong\u003e170mm Round Beacon Mounting Plate\u003c\/strong\u003e\u003c\/a\u003e.\u003c\/p\u003e","brand":"UAG Services","offers":[{"title":"Default Title","offer_id":47377389682772,"sku":"BMB-OS-145","price":30.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0641\/7389\/9860\/files\/bmb-os-145-offset_beacon_mounting_bracket_145mm-main.webp?v=1784639564"},{"product_id":"universal-interior-window-mount-warning-light-heads","title":"Adjustable Warning Light Window Mount","description":"\u003cp\u003eWM-155-30 Adjustable Warning Light Window Mount fits a standard surface mount warning light head to the inside of a front, side or rear vehicle window, projecting the warning light outward through the glass without drilling into the dashboard, interior trim or bodywork. The angled black housing shrouds the light head from the cabin, helping prevent flashback into the vehicle and reducing distraction to the driver. Unlike an integrated dash or visor light, the warning light head and window mount remain separate components, so either part can be replaced independently.\u003c\/p\u003e\n\n\u003cp\u003eThe mount fixes to the glass with its factory-applied 3M double-sided adhesive tape. Peel the backing, position the mount on clean, dry glass and press firmly for 30 seconds. Choose a position that does not obstruct the driver's view or interfere with window operation, tint film, demister elements or other window fittings.\u003c\/p\u003e\n\n\u003cp\u003eThe light head fastens to one of the three supplied back plates with the included screws and nuts, and the assembled module seats in the housing on washered acorn nuts running in curved slots at the rear. Loosening the nuts lets the module slide within the slots to adjust the viewing angle by up to 30 degrees, so output aims correctly through raked windscreens, side glass and rear windows, before locking off.\u003c\/p\u003e\n\n\u003cp\u003eThe mount opening holds surface mount warning light heads up to 122mm wide. The confirmed UAGS pairing is the \u003ca href=\"\/products\/u30-12a-ultra-slim-12w-amber-led-warning-light\"\u003e\u003cstrong\u003eU30-12A 12W Ultra-Slim Amber LED Warning Light Head\u003c\/strong\u003e\u003c\/a\u003e, whose 119mm slim housing sits within the mount opening. The three back plate options suit different module fixings. Width alone does not guarantee compatibility: the light head's depth, mounting hole position and cable clearance also need to be considered, so contact UAGS to confirm fitment before ordering the mount for another light head model.\u003c\/p\u003e\n\n\u003cp\u003eThe housing is moulded ABS plastic in black with an overall width of 154.5mm (154.5 x 78.4 x 91mm). Clean it with a damp cloth or mild soapy water; avoid solvents and harsh chemical cleaners, which can craze the plastic.\u003c\/p\u003e\n\n\u003cp\u003eThe WM-155-30 suits traffic control utes, TMA support vehicles, shared fleet vehicles, hire vehicles and other applications where drilling into panels or bodywork is not an option. Paired with the U30-12A, the mount provides the same general interior directional warning function as a conventional dash or visor light, while allowing the light head and housing to be replaced separately. For crews who previously ran H2 series visor kits, this covers the same role.\u003c\/p\u003e\n\n\u003cp\u003eThis listing is for the WM-155-30 window mount, three back plates and installation fasteners only. The warning light head shown in the images is for illustration and is sold separately.\u003c\/p\u003e","brand":"UAG Services","offers":[{"title":"Default Title","offer_id":47408249307220,"sku":"WM-155-30","price":30.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0641\/7389\/9860\/files\/wm-155-30-lighthead-mount-front.webp?v=1784808467"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0641\/7389\/9860\/collections\/98.jpg?v=1751527623","url":"https:\/\/uags.com.au\/collections\/warning-lights.oembed","provider":"UAG Services","version":"1.0","type":"link"}