{"title":"Vehicle Safety","description":"  \u003cp\u003eUAGS supplies vehicle safety products and fitout accessories for trucks, utes, traffic control vehicles, fleet vehicles and plant. The range includes reflective marking products, fire extinguisher brackets, fire suppression devices, towbar steps, vehicle direction alarms and related safety equipment.\u003c\/p\u003e\n\n\u003cp\u003eCheck each product page for vehicle compatibility, dimensions, mounting requirements, operating details and included components before ordering.\u003c\/p\u003e","products":[{"product_id":"brigade-reverse-alarm-white-noise-82db","title":"Brigade Reverse Alarm White Noise 82dB","description":"\u003cp\u003eThe Brigade Reverse Alarm White Noise 82dB (model BBS-82) is a bbs-tek BACKALARM broadband reverse alarm for utes, trucks, plant and traffic control vehicles. Instead of the constant single-tone beep of a standard reversing alarm, it produces a multi-frequency broadband sound that dissipates quickly and stays localised to the danger zone directly behind the vehicle.\u003c\/p\u003e\u003cp\u003eBecause the sound doesn't carry the way a single-tone beeper does, people working nearby can tell exactly which vehicle is reversing without the noise nuisance and complaints that come with standard alarms. This makes it a practical option for depots, worksites and traffic control operations where several vehicles may be moving at once.\u003c\/p\u003e\u003cp\u003eThe BBS-82 is the only alarm in the Brigade medium-duty range that carries NAS\/PIEK approval for night-time delivery, a European low-noise certification. Night works noise limits in Australia are set by the relevant council or road authority, so check the conditions that apply to your job.\u003c\/p\u003e\u003cp\u003eThe alarm is sealed to IP68 and epoxy filled against mud, water and vibration, with a mechanical resistance rating of 10G, and it can be steam and pressure cleaned. It runs on 12V and 24V systems with a 9 to 32V operating range, and mounts on the bottom or rear surface using the supplied bracket. It carries UN ECE Regulation 10.04 EMC approval (E11*10R04\/03*5170*01) and conforms to SAE J994.\u003c\/p\u003e\u003cp\u003eInstallation should be carried out by a suitably competent person or auto electrician.\u003c\/p\u003e\u003cp\u003eThis alarm runs at a fixed 82dB. If your vehicles move between quiet residential streets and noisy sites, the \u003ca href=\"\/products\/brigade-self-adjusting-reverse-alarm-white-noise-77-97db\"\u003eBrigade Self Adjusting Reverse Alarm 77-97dB\u003c\/a\u003e reads the surrounding noise and sets its own volume 5 to 10dB above it instead.\u003c\/p\u003e\u003cp\u003eAlso available: the \u003ca href=\"\/products\/vehicle-direction-alarm-left-right-reverse\"\u003eVehicle Direction Alarm\u003c\/a\u003e, a directional voice\/tonal alarm covering left, right and reverse movement, for sites that need direction-specific warnings rather than a broadband reverse tone.\u003c\/p\u003e","brand":"Brigade","offers":[{"title":"Default Title","offer_id":42197234090068,"sku":"BBS82","price":119.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0641\/7389\/9860\/files\/BBS-82_Brigade_Reverse_alarm_01.webp?v=1753600667"},{"product_id":"blue-forewarning-safety-arrow-led-light","title":"Blue Forewarning Safety Arrow LED Light","description":"\u003ch1\u003eBLUE FOREWARNING ARROW\u003c\/h1\u003e\n\n\u003cp\u003eSKU: U40-B\u003c\/p\u003e\n\n\u003cp\u003eForewarning Arrow promotes workplace safety by preventing dangerous collisions. Alerts pedestrians, ground workers and other vehicles of vehicle\/plant approaching particular with blind corners and cross aisle traffic. Easily mounted to plant, it projects a bright LED arrow on the floor’s surface – alerting people and other vehicles in the area, regardless of ambient noise, to the nearby presence of the vehicle. As the vehicle travels, a bright arrow light in blue shines across the floor about 3m ahead of or behind it (depending on the mounting location), letting people know that a vehicle is approaching. Can be used on any plant or machinery, like forklifts, Elevated Work Platforms, Profiles, Trucks, etc...\u003c\/p\u003e\n\n\u003ch2\u003e\u003cspan style=\"color:#FF0000;\"\u003eFeatures\u003c\/span\u003e\u003c\/h2\u003e\n\n\u003cul\u003e\n\t\u003cli\u003e12-60V DC\u003c\/li\u003e\n\t\u003cli\u003eEasy to install and maintenance free\u003c\/li\u003e\n\t\u003cli\u003eSize: 100mm (width) 37mm (Height) 94mm (Depth)\u003c\/li\u003e\n\t\u003cli\u003eBlue Arrow projection\u003c\/li\u003e\n\t\u003cli\u003eIP 67 Rating\u003c\/li\u003e\n\t\u003cli\u003ePolycarbonate Lens\u003c\/li\u003e\n\t\u003cli\u003eAluminium Housing\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003e\u003cspan style=\"color:#FF0000;\"\u003eSpecifications\u003c\/span\u003e\u003c\/h2\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eOP. VOLTAGE: 12-60VDC\u003c\/li\u003e\n\t\u003cli\u003eMOUNTING: Stainless steel Bracket\u003c\/li\u003e\n\t\u003cli\u003eWIDTH: 100mm (without bracket)\u003c\/li\u003e\n\t\u003cli\u003eHEIGHT: 37mm (without bracket)\u003c\/li\u003e\n\t\u003cli\u003eDEPTH: 94mm (without bracket)\u003c\/li\u003e\n\t\u003cli\u003eCURRENT DRAW: 0.5-0.7A @12.8VDC\u003c\/li\u003e\n\t\u003cli\u003eIP RATING: 67\u003c\/li\u003e\n\t\u003cli\u003eMATERIAL: Aluminium\u003c\/li\u003e\n\t\u003cli\u003eLENS: Polycarbonate\u003c\/li\u003e\n\t\u003cli\u003eWEIGHT: 430GRM\u003c\/li\u003e\n\t\u003cli\u003eLED: 3W LED x 3\u003c\/li\u003e\n\t\u003cli\u003eLED COLOUR: Blue\u003c\/li\u003e\n\t\u003cli\u003eWIRE: Red\/Black\u003c\/li\u003e\n\t\u003cli\u003eOP. TEMP: -20 to 70 Deg. C\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n","brand":"UAG Services","offers":[{"title":"Default Title","offer_id":42197385281620,"sku":"U40-3BA","price":140.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0641\/7389\/9860\/files\/U40-3BA_c6b0c105-7cce-4d94-b3c1-29c1cb5e9fd7.jpg?v=1751365726"},{"product_id":"class-1-reflective-tape-yellow-45-7-meters-x-50mm-wide","title":"Class 1 Reflective Tape Yellow | 50mm | 45.7m Roll","description":"\u003cp\u003e\u003cstrong\u003eClass 1 Reflective Tape Yellow\u003c\/strong\u003e in the full 45.7 metre roll is the fleet buy: 3M retroreflective marking tape in vivid yellow, 50mm wide, that returns headlight beam back toward the driver so marked trucks, trailers and equipment read brightly at night.\u003c\/p\u003e\n\n\u003cp\u003eOne roll covers serious marking work: conspicuity lines along the sides and rear of trucks, trailers and large vehicles, tailgates and tray edges, racking, gate posts, bollards and plant that works or parks where vehicles move after dark. Keeping a roll in the workshop means every vehicle that comes through can be marked or touched up on the spot.\u003c\/p\u003e\n\n\u003cp\u003eThe tape is water resistant and non-corroding, with a peel-off backing for direct application. It holds best on smooth, clean, dry surfaces such as painted metal and aluminium; surface preparation makes more difference to tape life than anything else.\u003c\/p\u003e\n\n\u003cp\u003eFor patch repairs and small jobs, the same tape is sold \u003ca href=\"\/products\/class-1-reflective-tape-yellow-1-meter-x-50mm-wide\"\u003e\u003cstrong\u003eby the metre\u003c\/strong\u003e\u003c\/a\u003e. For where reflective tape earns its keep on a work fleet, see our \u003ca href=\"\/blogs\/news\/reflective-tape-guide\"\u003e\u003cstrong\u003ereflective tape guide\u003c\/strong\u003e\u003c\/a\u003e.\u003c\/p\u003e","brand":"UAG Services","offers":[{"title":"Default Title","offer_id":42197437644884,"sku":"RTY-50-CLASS1","price":200.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0641\/7389\/9860\/files\/RTY-50-CLASS1_1b71ba08-d193-47b0-a18a-ed5fcd522a8b.jpg?v=1751367204"},{"product_id":"10-sticker-vehicle-pack","title":"10 Sticker Vehicle Pack","description":"\u003cp\u003e10 Sticker Vehicle sheet\u003c\/p\u003e\n\n\u003cp\u003eA4 Sheet - Uncoated white long term outdoor vinyl\u003c\/p\u003e\n\n\u003cp\u003eEach pack contains\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003e1 x First Aid Sticker (70 x 90mm)\u003c\/li\u003e\n\t\u003cli\u003e1 x Fire Extinguisher Sticker (70 x 90mm)\u003c\/li\u003e\n\t\u003cli\u003e2 x Diesel Fuel Sticker (80 x 20mm)\u003c\/li\u003e\n\t\u003cli\u003e2 x Unleaded Sticker (80 x 20mm)\u003c\/li\u003e\n\t\u003cli\u003e4 x Pinch Point Stickers (62 x 42mm)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n","brand":"UAG Services","offers":[{"title":"Default Title","offer_id":42197437775956,"sku":"stickerP01","price":35.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0641\/7389\/9860\/files\/stickerP01.jpg?v=1751367224"},{"product_id":"class-1-reflective-tape-yellow-1-meter-x-50mm-wide","title":"Class 1 Reflective Tape Yellow | 50mm | Per Metre","description":"\u003cp\u003e\u003cstrong\u003eClass 1 Reflective Tape Yellow\u003c\/strong\u003e is a 3M retroreflective marking tape in vivid yellow, 50mm wide and sold by the metre. Applied to a clean surface it returns headlight beam back toward the driver, so marked trucks, trailers and equipment read brightly at night from the direction that matters.\u003c\/p\u003e\n\n\u003cp\u003eThe classic job is conspicuity marking: lines of tape along the sides and rear of trucks, trailers and large vehicles that make the vehicle outline readable after dark. The same tape marks tailgates and tray edges, racking, gate posts, bollards and plant that works or parks where vehicles move at night.\u003c\/p\u003e\n\n\u003cp\u003eThe tape is water resistant and non-corroding, with a peel-off backing for direct application. It holds best on smooth, clean, dry surfaces such as painted metal and aluminium; surface preparation makes more difference to tape life than anything else.\u003c\/p\u003e\n\n\u003cp\u003eSold per metre: order quantity 1 for one metre of tape, and multi-metre orders are supplied as one continuous length. Per-metre buying suits patch repairs, single fixtures and small jobs. For marking out a full vehicle or keeping workshop stock, the \u003ca href=\"\/products\/class-1-reflective-tape-yellow-45-7-meters-x-50mm-wide\"\u003e\u003cstrong\u003e45.7 metre roll\u003c\/strong\u003e\u003c\/a\u003e works out cheaper per metre. For where reflective tape earns its keep on a work fleet, see our \u003ca href=\"\/blogs\/news\/reflective-tape-guide\"\u003e\u003cstrong\u003ereflective tape guide\u003c\/strong\u003e\u003c\/a\u003e.\u003c\/p\u003e","brand":"UAG Services","offers":[{"title":"Default Title","offer_id":42197438169172,"sku":"RTY-1M-CLASS1","price":6.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0641\/7389\/9860\/files\/RTY-1M-CLASS1_a28c06a3-387a-4425-8c07-3740e733e115.jpg?v=1751367256"},{"product_id":"stepmate-for-your-towbar","title":"Stepmate Towbar Step","description":"\u003cp\u003eStepmate is an Australian-made towbar step that fits between your tow ball and tow bar tongue. It gives you a solid step at the rear of the vehicle for loading the roof, washing the vehicle or reaching into the back. It stays fitted when you tow, so there is no need to take it off before hitching up a trailer.\u003c\/p\u003e\n\u003cp\u003eIt is made from 4mm steel plate, zinc nickel coated and finished in a textured powder coat, in black or safety yellow. The safety yellow suits fleets with OH\u0026amp;S colour requirements. The manufacturer rates it to 120kg per side (240kg total).\u003c\/p\u003e\n\u003cp\u003eFitting uses your existing tow ball, with no drilling. Remove the tow ball, sit Stepmate over the tongue, refit the tow ball, then wind in the two locking bolts until they bear on the sides of the tongue and lock them off with the nuts. It suits tongues from 60mm to 84mm wide.\u003c\/p\u003e\n\u003cp\u003eTongue shapes and tow ball setups vary between makes and model years, so check yours against the specifications before ordering. The tow ball is not included, as Stepmate fits under your existing one.\u003c\/p\u003e","brand":"UAG Services","offers":[{"title":"YELLOW","offer_id":42197439807572,"sku":"STEPM-YEL","price":250.0,"currency_code":"AUD","in_stock":true},{"title":"BLACK","offer_id":42197439840340,"sku":"STEPM-BLK","price":250.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0641\/7389\/9860\/files\/stepmate-towball-step-yellow-installed.webp?v=1790322729"},{"product_id":"fire-extinguisher-bracket-21-24-isuzu-d-max","title":"Fire Extinguisher Bracket - 21-26 Isuzu D-MAX","description":"\u003cp\u003e\u003cstrong\u003eFire Extinguisher Bracket (2021-2026 Isuzu D-MAX)\u003c\/strong\u003e is a seat mount that fixes a fire extinguisher to the passenger seat rails of the 2021 to 2026 Isuzu D-MAX. It suits traffic control, civil, utility and fleet utes where crews want the extinguisher kept in the cab and within reach of both front seats, instead of rolling around the floor or buried behind the seat.\u003c\/p\u003e\n\n\u003cp\u003eThe bracket bolts on using the existing seat bolts, so there is no drilling into the floor or trim. Your extinguisher's own mounting bracket then bolts to this plate using the two bolts, washers and nylon nuts supplied. It is designed for a 1kg extinguisher, and we have fitted 1.5kg extinguishers without issue.\u003c\/p\u003e\n\n\u003cp\u003eFitting means removing and refitting the passenger seat bolts. Seat bolts are safety-critical, so refit them to the vehicle manufacturer's torque specification. If you are not confident doing this, have the bracket fitted by a qualified installer.\u003c\/p\u003e\n\n\u003cp\u003eThe bracket is 3mm steel, designed and made in Australia, and is supplied in either a black or stainless steel finish depending on stock. Contact us before ordering if you need a particular finish. The fire extinguisher is sold separately.\u003c\/p\u003e\n\n\u003cp\u003eWe also stock this bracket for the \u003ca href=\"\/products\/fire-extinguisher-bracket-15-24-n80-toyota-hilux\"\u003e2015 to 2025 N80 Toyota Hilux\u003c\/a\u003e, the \u003ca href=\"\/products\/fire-extinguisher-bracket-2026-n90-toyota-hilux\"\u003e2026 onwards N90 Toyota Hilux\u003c\/a\u003e and the \u003ca href=\"\/products\/fire-extinguisher-bracket-mv-mitsubishi-triton\"\u003eMV Mitsubishi Triton\u003c\/a\u003e. UAGS also fits these brackets as part of complete \u003ca href=\"\/collections\/vehicle-fit-outs-fabrication\"\u003etraffic control vehicle fit-outs\u003c\/a\u003e, alongside racking cages, warning lights and traffic control equipment.\u003c\/p\u003e","brand":"UAG Services","offers":[{"title":"Default Title","offer_id":42197445312596,"sku":"BRKT-DMAX-FIRE-EXT","price":79.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0641\/7389\/9860\/files\/BRKT-DMAX-FIRE-EXT.webp?v=1751367824"},{"product_id":"fire-extinguisher-bracket-15-24-n80-toyota-hilux","title":"Fire Extinguisher Bracket - 15-25 N80 Toyota Hilux","description":"\u003cp\u003e\u003cstrong\u003eFire Extinguisher Bracket (2015-2025 N80 Toyota Hilux)\u003c\/strong\u003e is a seat mount that fixes a fire extinguisher to the passenger seat rails of the 2015 to 2025 N80 Toyota Hilux. It suits traffic control, civil, utility and fleet utes where crews want the extinguisher kept in the cab and within reach of both front seats, instead of rolling around the floor or buried behind the seat.\u003c\/p\u003e\n\n\u003cp\u003eThe bracket bolts on using the existing seat bolts, so there is no drilling into the floor or trim. Your extinguisher's own mounting bracket then bolts to this plate using the two bolts, washers and nylon nuts supplied. It is designed for a 1kg extinguisher, and we have fitted 1.5kg extinguishers without issue.\u003c\/p\u003e\n\n\u003cp\u003eFitting means removing and refitting the passenger seat bolts. Seat bolts are safety-critical, so refit them to the vehicle manufacturer's torque specification. If you are not confident doing this, have the bracket fitted by a qualified installer.\u003c\/p\u003e\n\n\u003cp\u003eThe bracket is 3mm steel, designed and made in Australia, and is supplied in either a black or stainless steel finish depending on stock. Contact us before ordering if you need a particular finish. The fire extinguisher is sold separately.\u003c\/p\u003e\n\n\u003cp\u003eWe also stock this bracket for the \u003ca href=\"\/products\/fire-extinguisher-bracket-2026-n90-toyota-hilux\"\u003e2026 onwards N90 Toyota Hilux\u003c\/a\u003e, the \u003ca href=\"\/products\/fire-extinguisher-bracket-21-24-isuzu-d-max\"\u003e2021 to 2026 Isuzu D-MAX\u003c\/a\u003e and the \u003ca href=\"\/products\/fire-extinguisher-bracket-mv-mitsubishi-triton\"\u003eMV Mitsubishi Triton\u003c\/a\u003e. UAGS also fits these brackets as part of complete \u003ca href=\"\/collections\/vehicle-fit-outs-fabrication\"\u003etraffic control vehicle fit-outs\u003c\/a\u003e, alongside racking cages, warning lights and traffic control equipment.\u003c\/p\u003e","brand":"UAG Services","offers":[{"title":"Default Title","offer_id":42197445410900,"sku":"BRKT-N80-HILUX-FIRE-EXT","price":79.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0641\/7389\/9860\/files\/fire-extinguisher-bracket-15-24-n80-toyota-hilux-01.webp?v=1790391910"},{"product_id":"vehicle-direction-alarm-left-right-reverse","title":"Vehicle Direction Alarm | Left, Right \u0026 Reverse","description":"\u003cp\u003e\u003cstrong\u003eVehicle Direction Alarm | Left, Right and Reverse | VDA001\u003c\/strong\u003e is an audible warning system that announces a vehicle's movements to workers and pedestrians nearby. When the driver indicates or selects reverse, the alarm sounds the matching warning, backed by four flashing LEDs, so people on the ground know which way the vehicle is about to move.\u003c\/p\u003e\n\n\u003cp\u003eThe unit surface mounts to the vehicle body with the supplied screws and foam pad, and wires into the vehicle through a 6-pin connector with an 800mm breakout cable. Running 10 to 32V DC, one part number covers 12V utes and 24V trucks and plant. Installation by an auto electrician as part of the vehicle fit-out is recommended.\u003c\/p\u003e\n\n\u003cp\u003eWarnings play at 90dB in voice mode or 93dB tonal at 1kHz, selectable per installation, with left, right and reverse each triggering their own output. The directional announcement tells workers not just that the vehicle is moving but which way, information a standard reversing beeper cannot give.\u003c\/p\u003e\n\n\u003cp\u003eThe IP67-rated housing seals against dust and water for exposed mounting on trucks, plant and site vehicles that work in weather and get washed down.\u003c\/p\u003e\n\n\u003cp\u003eIt fits into a vehicle safety package alongside beacons, reversing equipment and vehicle warning lighting; UAGS fits alarms like this during traffic control \u003ca href=\"\/collections\/vehicle-fit-outs-fabrication\"\u003e\u003cstrong\u003evehicle fit-outs\u003c\/strong\u003e\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003cp\u003eTypical installs are traffic control vehicles working around crews on foot, waste and delivery trucks in pedestrian areas, and plant and site vehicles operating where ground workers are close to moving machines.\u003c\/p\u003e","brand":"UAG Services","offers":[{"title":"Default Title","offer_id":47372603195476,"sku":"VDA001","price":300.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0641\/7389\/9860\/files\/VDA001_Vehicle-Direction-Alarm.webp?v=1784309087"},{"product_id":"fss100-firestick-fire-suppression-device","title":"FSS100 Firestick | Fire Suppression Device","description":"\u003cp\u003e\u003cstrong\u003eFSS100 Firestick | Fire Suppression Device | 100 Seconds\u003c\/strong\u003e is a compact, non-pressurised first-response tool for controlling small, developing fires before they take hold. It gives up to 100 seconds of continuous suppression from a unit that weighs 365 grams, small enough to mount in vehicles and spaces where a conventional extinguisher is too bulky.\u003c\/p\u003e\n\n\u003cp\u003eThe Firestick stores within reach using the supplied mounting clips: in the cab of a work vehicle, beside plant controls, in a toolbox, workshop, boat or switch room. To operate, remove the top protection cap, take the striker from the handle, strike the ignition tip, and aim the discharge at the base of the flames from a safe distance.\u003c\/p\u003e\n\n\u003cp\u003eOnce activated, the unit releases a potassium-based aerosol that interrupts the fire's chemical chain reaction. The discharge is controlled and sustained rather than a short high-pressure burst, letting the operator work the suppression over the fire for up to 100 seconds. It works on Class A, B, C, E and F fires, does not deplete the surrounding oxygen and leaves no residue, which matters around electrics, engines and enclosed spaces.\u003c\/p\u003e\n\n\u003cp\u003eThe build is a metal inner tube in a PVC outer casing with no pressure vessel, so there is no servicing, refilling or pressure testing across its 8-year shelf life. Mount it and check it visually; that is the maintenance schedule.\u003c\/p\u003e\n\n\u003cp\u003eOn fitted work vehicles it sits alongside a mounted extinguisher rather than replacing one; UAGS also stocks vehicle-specific \u003ca href=\"\/products\/fire-extinguisher-bracket-15-24-n80-toyota-hilux\"\u003e\u003cstrong\u003efire extinguisher brackets\u003c\/strong\u003e\u003c\/a\u003e for cab mounting.\u003c\/p\u003e\n\n\u003cp\u003eTypical users keep Firesticks in traffic control utes, plant and machinery, workshops, caravans, marine craft and switchboards, anywhere a fast first response in the opening seconds of a fire is worth having close at hand.\u003c\/p\u003e","brand":"UAG Services","offers":[{"title":"Default Title","offer_id":47372605849684,"sku":"FSS100","price":160.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0641\/7389\/9860\/files\/FSS100_fire_suppssion_stick_01.webp?v=1784309010"},{"product_id":"brigade-self-adjusting-reverse-alarm-white-noise-77-97db","title":"Brigade Self Adjusting Reverse Alarm White Noise 77-97dB","description":"\u003cp\u003eThe Brigade Self Adjusting Reverse Alarm White Noise 77-97dB (model SA-BBS-97) is a bbs-tek smart broadband reverse alarm for trucks, plant, tippers and traffic control vehicles. A built-in microphone reads the noise around the vehicle and the alarm sets its own volume 5 to 10dB above the ambient level, anywhere between 77dB and 97dB. On a quiet residential street it stays quiet. On a busy site with plant running, it lifts to stay heard.\u003c\/p\u003e\u003cp\u003eLike the rest of the bbs-tek range it produces a multi-frequency broadband sound rather than a single-tone beep. The sound dissipates quickly and stays localised to the danger zone directly behind the vehicle, so people working nearby can tell which vehicle is reversing without the noise carrying across a whole depot or site.\u003c\/p\u003e\u003cp\u003eA fixed-output alarm has to be set loud enough for the worst case, which means it is louder than it needs to be most of the time. Self adjusting output is the practical answer where one vehicle works across mixed environments, or where noise complaints have already become a problem.\u003c\/p\u003e\u003cp\u003eThe alarm is sealed to IP68 and epoxy filled against mud, water and vibration, with a mechanical resistance rating of 10G, and it can be steam and pressure cleaned. It runs on 12V and 24V systems with a 10 to 32V operating range. It carries UN ECE Regulation 10.06 EMC approval (E11*10R06\/02*13115*00), is CE marked, conforms to SAE J994 and has been EMC tested to ISO 13766-1 and ISO 13766-2 for earth-moving and construction machinery.\u003c\/p\u003e\u003cp\u003eInstallation should be carried out by a suitably competent person or auto electrician. Do not fit a self adjusting alarm in a confined space where an echo can interfere with the volume system.\u003c\/p\u003e\u003cp\u003eAlso available: the \u003ca href=\"\/products\/brigade-reverse-alarm-white-noise-82db\"\u003eBrigade Reverse Alarm White Noise 82dB\u003c\/a\u003e, a fixed-output alarm for vehicles that work in one consistent environment.\u003c\/p\u003e","brand":"Brigade","offers":[{"title":"Default Title","offer_id":47475951501396,"sku":"BBS97SA","price":225.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0641\/7389\/9860\/files\/sa-bbs-97-smart_backup_alarm-main-01.webp?v=1785912699"},{"product_id":"fire-extinguisher-bracket-2026-n90-toyota-hilux","title":"Fire Extinguisher Bracket - 2026+ N90 Toyota Hilux","description":"\u003cp\u003e\u003cstrong\u003eFire Extinguisher Bracket (2026+ N90 Toyota Hilux)\u003c\/strong\u003e is a seat mount that fixes a fire extinguisher to the passenger seat rails of the 2026 onwards N90 Toyota Hilux. It suits traffic control, civil, utility and fleet utes where crews want the extinguisher kept in the cab and within reach of both front seats, instead of rolling around the floor or buried behind the seat.\u003c\/p\u003e\n\n\u003cp\u003eThe bracket bolts on using the existing seat bolts, so there is no drilling into the floor or trim. Your extinguisher's own mounting bracket then bolts to this plate using the two bolts, washers and nylon nuts supplied. It is designed for a 1kg extinguisher, and we have fitted 1.5kg extinguishers without issue.\u003c\/p\u003e\n\n\u003cp\u003eFitting means removing and refitting the passenger seat bolts. Seat bolts are safety-critical, so refit them to the vehicle manufacturer's torque specification. If you are not confident doing this, have the bracket fitted by a qualified installer.\u003c\/p\u003e\n\n\u003cp\u003eThe bracket is 3mm steel, designed and made in Australia, and is supplied in either a black or stainless steel finish depending on stock. Contact us before ordering if you need a particular finish. The fire extinguisher is sold separately.\u003c\/p\u003e\n\n\u003cp\u003eWe also stock this bracket for the \u003ca href=\"\/products\/fire-extinguisher-bracket-15-24-n80-toyota-hilux\"\u003e2015 to 2025 N80 Toyota Hilux\u003c\/a\u003e, the \u003ca href=\"\/products\/fire-extinguisher-bracket-21-24-isuzu-d-max\"\u003e2021 to 2026 Isuzu D-MAX\u003c\/a\u003e and the \u003ca href=\"\/products\/fire-extinguisher-bracket-mv-mitsubishi-triton\"\u003eMV Mitsubishi Triton\u003c\/a\u003e. UAGS also fits these brackets as part of complete \u003ca href=\"\/collections\/vehicle-fit-outs-fabrication\"\u003etraffic control vehicle fit-outs\u003c\/a\u003e, alongside racking cages, warning lights and traffic control equipment.\u003c\/p\u003e","brand":"UAG Services","offers":[{"title":"Default Title","offer_id":47672189157460,"sku":"BRKT-N90-HILUX-FIRE-EXT","price":79.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0641\/7389\/9860\/files\/fire-extinguisher-bracket-2026-n90-toyota-hilux-01.webp?v=1790677277"},{"product_id":"fire-extinguisher-bracket-mv-mitsubishi-triton","title":"Fire Extinguisher Bracket - MV Mitsubishi Triton","description":"\u003cp\u003e\u003cstrong\u003eFire Extinguisher Bracket (MV Mitsubishi Triton)\u003c\/strong\u003e is a seat mount that fixes a fire extinguisher to the passenger seat rails of the MV series Mitsubishi Triton. It suits traffic control, civil, utility and fleet utes where crews want the extinguisher kept in the cab and within reach of both front seats, instead of rolling around the floor or buried behind the seat.\u003c\/p\u003e\n\n\u003cp\u003eThe bracket bolts on using the existing seat bolts, so there is no drilling into the floor or trim. Your extinguisher's own mounting bracket then bolts to this plate using the two bolts, washers and nylon nuts supplied. It is designed for a 1kg extinguisher, and we have fitted 1.5kg extinguishers without issue.\u003c\/p\u003e\n\n\u003cp\u003eFitting means removing and refitting the passenger seat bolts. Seat bolts are safety-critical, so refit them to the vehicle manufacturer's torque specification. If you are not confident doing this, have the bracket fitted by a qualified installer.\u003c\/p\u003e\n\n\u003cp\u003eThe bracket is 3mm steel, designed and made in Australia, and is supplied in either a black or stainless steel finish depending on stock. Contact us before ordering if you need a particular finish. The fire extinguisher is sold separately.\u003c\/p\u003e\n\n\u003cp\u003eWe also stock this bracket for the \u003ca href=\"\/products\/fire-extinguisher-bracket-15-24-n80-toyota-hilux\"\u003e2015 to 2025 N80 Toyota Hilux\u003c\/a\u003e, the \u003ca href=\"\/products\/fire-extinguisher-bracket-2026-n90-toyota-hilux\"\u003e2026 onwards N90 Toyota Hilux\u003c\/a\u003e and the \u003ca href=\"\/products\/fire-extinguisher-bracket-21-24-isuzu-d-max\"\u003e2021 to 2026 Isuzu D-MAX\u003c\/a\u003e. UAGS also fits these brackets as part of complete \u003ca href=\"\/collections\/vehicle-fit-outs-fabrication\"\u003etraffic control vehicle fit-outs\u003c\/a\u003e, alongside racking cages, warning lights and traffic control equipment.\u003c\/p\u003e","brand":"UAG Services","offers":[{"title":"Default Title","offer_id":47672189583444,"sku":"BRKT-MV-TRITON-FIRE-EXT","price":79.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0641\/7389\/9860\/files\/fire-extinguisher-bracket-mv-mitsubishi-triton-02.webp?v=1790391646"}],"url":"https:\/\/uags.com.au\/collections\/vehicle-safety.oembed","provider":"UAG Services","version":"1.0","type":"link"}