{"title":"ECCO","description":"\u003cp\u003eECCO LED warning beacons and lights for work vehicles, supplied by UAGS.\u003c\/p\u003e","products":[{"product_id":"ecco-7160a-reflex-amber-led-beacon-3-bolt-mount","title":"ECCO 7160 Reflex Amber LED Beacon | 3-Bolt Mount","description":"\u003cp\u003eThe \u003cstrong\u003eECCO 7160A Reflex amber LED beacon\u003c\/strong\u003e is a permanently mounted 360-degree warning beacon for work vehicles and plant. High intensity LEDs work with ECCO's reflector design to produce an SAE J845 Class I warning signal from a housing 165mm in diameter and 99mm high. It suits fleets replacing older rotating or strobe beacons.\u003c\/p\u003e\n\u003cp\u003eThere are 23 flash patterns to choose from, covering steady burn, single, double, quad, quint and burst flashes, slow, fast and wave rotate modes, ramp up and down, and random. High and low intensity settings are available, and multiple 7160 beacons can be synchronised on the one vehicle.\u003c\/p\u003e\n\u003cp\u003eThe 7160A fixes with a 3-bolt flange, and ECCO also lists it as suiting a 1 inch pipe mount. The mounting hardware is supplied: three M5 x 30mm zinc plated pan head Phillips machine screws with M5 internal tooth lock washers and M5 hex nuts, along with a rubber base gasket and a rubber cable grommet that fits a 9.5mm drilled hole. It is a direct-wired, permanent-mount beacon. The cigarette plug version in the 7160 range is the vacuum magnet model, not this one. For mounting clear of a rack upright or roof bar, it suits the UAGS \u003ca href=\"\/products\/metal-angled-bracket-for-beacon\"\u003e\u003cstrong\u003e175mm Offset Beacon Mounting Bracket\u003c\/strong\u003e\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eThe beacon has five individual 400mm leads: red (positive), black (negative), yellow (pattern select), blue (sync) and orange (dimming). The ECCO installation instructions can be downloaded from this page and cover the 7160 series, including the vacuum magnet model. It runs on 12-24V DC with a listed draw of 2.0A peak, carries an IP66 rating and is rated for -30°C to +50°C.\u003c\/p\u003e\n\u003cp\u003eECCO product data lists \u003cstrong\u003eSAE J845 Class I\u003c\/strong\u003e, \u003cstrong\u003eECE R10\u003c\/strong\u003e, CE, CISPR 25 Level 3 and RoHS. These relate to light output and electrical performance as per the supplied product data.\u003c\/p\u003e\n\u003cp\u003eCommonly fitted to traffic control vehicles, civil fleet vehicles, utility vehicles, council maintenance vehicles and plant equipment. Vehicle lighting requirements may vary by vehicle type, registration category, jurisdiction and intended use. Vehicle warning systems support visibility but do not replace a traffic management plan or traffic guidance scheme.\u003c\/p\u003e","brand":"ECCO","offers":[{"title":"Default Title","offer_id":47741807001684,"sku":"ECCO-7160A","price":329.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0641\/7389\/9860\/files\/ecco-7160a-amber-led-beacon-main-01.webp?v=1790688267"}],"url":"https:\/\/uags.com.au\/collections\/ecco.oembed","provider":"UAG Services","version":"1.0","type":"link"}